Cap, rotor, and plugs question.

yoshi351w · 09-07-2003, 05:04 PM

I have a retro-fitted 351w and was wandering what plugs, cap, and rotor to buy.

Thanks,
Josh

__________________
86gt 359w reverse manual c4 w/3800stall from JW, bottom end was balanced by Mesa Balancing and assembled with clevite 77 h series bearings and arp studs. 9.7:1 KB pistons. Heads were self ported as much as possible and bowls were finished by Mesa. They have 1.94 intakes & 1.60 exhaust stainless valves. Victor jr. intake, 1-3/4" mac lt's, msd 6al, 4:10 gears, bfg dr's with convo pros. now working on suspension and chassis and saving for heads.

HotRoddin · 09-07-2003, 05:58 PM

Quote:

Originally posted by yoshi351w
I have a retro-fitted 351w and was wandering what plugs, cap, and rotor to buy.

Need more data ???
What do you mean retro-fitted ? With what ?

yoshi351w · 09-07-2003, 06:50 PM

What I mean by retro-fitted is that it used to be a non roller motor and now it is. Well I decided to go with autolite 25 plugs. And I gapped them to 58. She is purrin like a kitten now.

HotRoddin · 09-07-2003, 09:01 PM

Quote:

Originally posted by yoshi351w
What I mean by retro-fitted is that it used to be a non roller motor and now it is.

Ohhhhhhh ok then just get you some Autolite 25's and gap em to 58

yoshi351w · 09-08-2003, 05:22 PM

Hey thanks man I bought the 25's and gapped them to 57 before I saw your post.

09-07-2003, 05:04 PM	#1
yoshi351w Registered Member Join Date: Aug 2003 Location: s. fl Posts: 23	Cap, rotor, and plugs question. I have a retro-fitted 351w and was wandering what plugs, cap, and rotor to buy. Thanks, Josh __________________ 86gt 359w reverse manual c4 w/3800stall from JW, bottom end was balanced by Mesa Balancing and assembled with clevite 77 h series bearings and arp studs. 9.7:1 KB pistons. Heads were self ported as much as possible and bowls were finished by Mesa. They have 1.94 intakes & 1.60 exhaust stainless valves. Victor jr. intake, 1-3/4" mac lt's, msd 6al, 4:10 gears, bfg dr's with convo pros. now working on suspension and chassis and saving for heads.

09-07-2003, 06:50 PM	#3
yoshi351w Registered Member Join Date: Aug 2003 Location: s. fl Posts: 23	What I mean by retro-fitted is that it used to be a non roller motor and now it is. Well I decided to go with autolite 25 plugs. And I gapped them to 58. She is purrin like a kitten now. __________________ 351w powered 86 gt with a reverse manual c4. Lots more but whos counting.

09-08-2003, 05:22 PM	#5
yoshi351w Registered Member Join Date: Aug 2003 Location: s. fl Posts: 23	Hey thanks man I bought the 25's and gapped them to 57 before I saw your post. __________________ 351w powered 86 gt with a reverse manual c4. Lots more but whos counting.