© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-10-2004, 08:06 PM | #1 |
Registered Member
Join Date: Feb 2004
Location: alpharetta,GA
Posts: 19
|
got 1,000 to spend. what to buy???
Well i was thinking new wider wheels(I have 96 cobra wheels). How wide can I go with cobra wheels without looking bad? Mybe I should just get nitto drag tires. And I want to got coilovers, what type should I get, I want the car to dig hard with street tires and still maintain good handiling on the street??
__________________
93 white lx, tko, 3.55, powerdyne 9lb, pulleys, mac headers,bbk x-pipe,flomaster,24lb injectors,77 mass air,75 t-body |
05-10-2004, 11:04 PM | #2 |
It's a lot like a race car
Join Date: Aug 2000
Location: Meridian, MS
Posts: 4,130
|
you can fit a P275 tire on those Cobra rims. Which is about as wide as you can go with a fox body without having to hit stuff with a hammer.
For 1K I say go with a good set of aluminum heads -Josh, aka the tireburner
__________________
1987 Buick T-type 1998 HD Electra Elide |
05-11-2004, 10:25 AM | #3 |
Registered Member
Join Date: Sep 2002
Location: Boston
Posts: 592
|
I second the motion! Try to score a set of TFS twisted wedge heads! Nothing compares to that in terms of pure umph!
__________________
91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior |
05-11-2004, 11:52 AM | #4 | |
Rebel Fleet Commander
Join Date: Oct 2001
Location: Huber Heights, OH
Posts: 1,003
|
Quote:
Same here
__________________
1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!" |
|
05-11-2004, 06:16 PM | #5 |
Registered Member
Join Date: Feb 2004
Location: alpharetta,GA
Posts: 19
|
Ya, i would love to get the heads but i did all the math for it and including the cam, gaskets, intake.timing chain, ect its about 2,000 + $$$ besides I am planing to get the d.s.s pro bullet 306 long block In about a little bit. So I am going to get new 03 cobra wheels w/ 275 nittos. One qeustion is what lowering springs will drop my car the most?? Pics would be good to. thanks
__________________
93 white lx, tko, 3.55, powerdyne 9lb, pulleys, mac headers,bbk x-pipe,flomaster,24lb injectors,77 mass air,75 t-body |
05-13-2004, 09:00 AM | #6 |
Rebel Fleet Commander
Join Date: Oct 2001
Location: Huber Heights, OH
Posts: 1,003
|
On second thought, I changed my mind. Do a do-it-yourself Twin Turbo setup I have heard of a lot of people building them for under 1K
__________________
1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!" |
05-14-2004, 05:23 PM | #7 |
Registered Member
Join Date: Jun 2001
Location: butler pa
Posts: 303
|
i used eibach sportlines and its about as low as youd ever need if you went with coilovers you could pick the height i found the best price for the sportlines on ebay from cj's pony parts this low though and you will deff need a bumpsteer kit
__________________
92lx wannabe saleen |
05-14-2004, 06:34 PM | #8 |
Registered Member
Join Date: Sep 2002
Location: Corona, Ca.
Posts: 80
|
control arms
__________________
Jeremy 1986 Mustang GT Convertible 1972 2 door 302 Maverick 1994 POS head gasket clubbed broke down T-bird with $6000 left to pay off |
05-18-2004, 01:04 AM | #9 |
I got something to say
Join Date: Sep 2001
Location: San Diego, CA
Posts: 1,557
|
hey ackbar does your car have a little bit of a traction problem?
__________________
91 LX Hatch 5.0 - made for the twisties 89 LX Hatchback 5.0 5spd. stolen/stripped 4/7/05 http://www.mustangworks.com/cgi-bin/...splay.cgi?3494 1987 Toyota Pickup Ricer Haters Club Member #33 Want a custom gauge cluster for your Vintage Mustang? www.jmeenterprises.com |
05-18-2004, 05:24 PM | #10 | |
Rebel Fleet Commander
Join Date: Oct 2001
Location: Huber Heights, OH
Posts: 1,003
|
Quote:
__________________
1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!" |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
$2500 to spend | LM5000 | Windsor Power | 14 | 10-07-2003 11:20 AM |
spend my $8000 | Jungle867 | Windsor Power | 4 | 05-06-2002 10:49 PM |
$180 to spend | mustangLX92 | Windsor Power | 10 | 02-25-2002 05:28 PM |
Please help me spend money!!! | JRowlette | Windsor Power | 5 | 06-22-2001 01:49 AM |
$1,500 to spend | TimGT | Modular Madness | 4 | 05-30-2001 08:06 PM |