© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-12-2004, 06:09 PM | #1 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
how to remove 5.0 badge?
doing a face lift on my stang. had those stupid stripes on there, 2 yellow ones, and i pulled htose off today. i want to remove the badges too. what is the easiest way to do this. i think a credit card with what solution? thanks,
jim
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-12-2004, 06:26 PM | #2 |
Registered Member
Join Date: Sep 2002
Posts: 156
|
ya maybe if that credit card isnt in service . but nething to that nature would work... i used a plastic razor blade then once i got them off i used GOO GONE to get the glue off.
__________________
347- ported X heads, Xcam , RPM air-gap intake, 650 holley DP, 10:5 comp., equal lenght shorties, pullies, MSD ignition, pro 5.0 shifter. stock fuel system !! best ET: 11.95 @113 1.64 60 foots |
08-12-2004, 08:33 PM | #3 |
Registered Member
Join Date: Aug 2002
Location: Rochester
Posts: 553
|
yea the credit card won't work. A plastic razor will work without cutting the paint and yes GO GONE!!! That $hit is one of the best products on the market. just be careful of how much you use, once its all off give the spot a nice polish and wax. If it gets stuck, use a hair drier to soften the adhesive.
|
08-13-2004, 07:13 AM | #4 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
thanks, i guess ill have to look for that "plastic" razor!
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-13-2004, 12:08 PM | #5 |
Registered Member
Join Date: Apr 2002
Location: Florida
Posts: 532
|
Get the badge heated up such as leaving your car in the sun for a bit or use a strong hair dryer or heat gun to heat up the adhesive also you can use anything plastic to get under there I wouldnt use a card you need something a bit stronger like maybe a old plastic spatula (sp) or something like that and just gently work it off and then like they said use some GOO GONE which is usually at any auto parts store, Kmart, or walmart and then just wash it off really well and wax it and your set. Hope we could help
__________________
90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73 |
08-13-2004, 02:45 PM | #6 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
great help guys. i went to a store and bought a plastic 1 1/2 inch putty knife (plastic). worked perfect with its edge. just forced it behind there and pushed down slowly. worked around the thing and it popped it fairly easily without heating it up (i heated up my stripes to get them off). i used goo gone after and after some rubbing it is gone! I need to buff it out i think as you can see faintly the 5.0 still. could be the paint faded around it though. either way, i like the looks of my sleeper now! except my license plate reads: 2FST2PAS
maybe they wont notice!
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-14-2004, 11:15 AM | #7 |
Registered Member
Join Date: Apr 2002
Location: Florida
Posts: 532
|
Like the plate been wanting to get one myself once I drop the 347 in it I was thinking slow50 or I1I1I1 ( i won.....) what do you guys think?
__________________
90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73 |
08-14-2004, 08:11 PM | #8 |
Domestic Rice really sucks!
Join Date: Apr 2002
Location: KY
Posts: 973
|
It must be nice to be able to use 8 characters on your plate. We can only use 6 with a space. 7 is not an option either. But I love the plate. I was thinking of getting this for my car Z28ETR. But I want to keep the sleeper look too, so I probably won't do it. I like slow50, that adds to the sleeper thing.
__________________
The sig says it all. |
08-15-2004, 01:05 PM | #9 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
i saw a vette on line that had this plate.
FSTPHUKR pretty funny
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-15-2004, 06:01 PM | #10 |
Registered Member
Join Date: Aug 2002
Location: Rochester
Posts: 553
|
Slow 5.0 for a sleeper... sick... Its always great when you smoke someone without them knowing what you have... keeps them guessin.
|
08-15-2004, 07:53 PM | #11 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
hey 88 five pointoh; i noticed you are in rochester, is this newyork? im in fairport.
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-19-2004, 03:05 PM | #12 |
Registered Member
Join Date: Apr 1999
Location: penfield, ny, u.s.
Posts: 78
|
i thought about getting either "sleeper", or "sleepr", before settling on "5oh2go"
__________________
'89 lx 5.0-FLowmasters, H-pipe with cats, 373's, pulleys, BBk headers Best 1/4 mile- 14.1 @98 mph (67 deg. 90+ humidity) Married and bought the new mods... Nitto DR's 245/50R16 NOS hopefully 100 shot |
08-19-2004, 03:22 PM | #13 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
how about ZZZzzzz
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to remove belt tensionner pulley (picture inside) | White GT | Windsor Power | 5 | 06-18-2004 06:37 AM |
How To Remove Smog Pump??? | BowTie Eater 5 Liter | Windsor Power | 2 | 08-04-2001 10:25 PM |
A/C Delete....Can I remove the condenser & the accumulator?? | MTU 50 | Windsor Power | 15 | 06-24-2001 12:26 AM |
347 badge | Smokedawg | Blue Oval Lounge | 5 | 03-21-2001 12:46 AM |
5.0 Badge Removal | Smokedawg | Windsor Power | 5 | 03-20-2001 08:34 PM |