Best Intake is What??

Stang Runner · 07-13-2001, 12:08 AM

Edelbrock Performer RPM does any one know how mush it flows?? I will be putting it on a 351w Is there one that flows better??

------------------
1988 LX 5.0 Was 3060lbs (full Tank) 14.65@101.3 On a Gtech Drivetrain: 3.55, World Class T-5, Lakewood Bellhousing, Adjustable Cluch Cable, AL Driveshaft, Manual Steering Rack Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks
Engine: Steal Mounts, K&N, Under Drive Pulles Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\back Cooling:3 Core Radiator,

jonnyk · 07-13-2001, 01:23 AM

Edelbrock RPM? Are we talking carb intakes? That will not work if you mean for a fuelie, 5.0 intakes aren't interchangeable with 351W's. Try TFS for that.

------------------
'91 LX Hatch, 17 ROH ZR6's, lowered, 3.73's, offroad H pipe, SN Cobra cat-back, ASP pullies, 14° timing, C&L 76mm MAF, 170A 3G, B&M Ripper on a T5
1991 LX Hatch 5.0L

Stang Runner · 07-13-2001, 07:25 AM

yes it is a EFI and yes it can go on a 351, upper is Edelbrock Performer RPM and get a lower truck 351w from Edelbrock Thanks for pointing that out.
I wrote it late last night

Ok I found out how much it Flows after Extrude-Hone 290 cfm

[This message has been edited by Stang Runner (edited 07-13-2001).]

SaleenGTS · 07-13-2001, 01:17 PM

Out of the Box flow numbers straight from a 5.0 mag
Performer: 215cfm
Performer RPM: 231 cfm
Victor Jr: 283 cfm
Victor: 294 cfm
Cobra: 205 cfm
GT-40: 212 cfm
TFS Street: 243 cfm
TFS Track: 257 cfm
TFS R: 279 cfm
TFS 351: 271 cfm
Holley: 268 cfm

------------------
Dustin
Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

Stang Runner · 07-13-2001, 10:34 PM

Hey Thanks SaleenGTS for the ## Looks like I will get the TFS 351: 271 cfm and have them Extrude-Honed

07-13-2001, 12:08 AM	#1
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Best Intake is What?? Edelbrock Performer RPM does any one know how mush it flows?? I will be putting it on a 351w Is there one that flows better?? ------------------ 1988 LX 5.0 Was 3060lbs (full Tank) 14.65@101.3 On a Gtech Drivetrain: 3.55, World Class T-5, Lakewood Bellhousing, Adjustable Cluch Cable, AL Driveshaft, Manual Steering Rack Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks Engine: Steal Mounts, K&N, Under Drive Pulles Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\back Cooling:3 Core Radiator,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
Edelbrock spec's and intake question??	jerryIII	Windsor Power	0	05-24-2001 12:49 PM
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM

07-13-2001, 01:23 AM	#2
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	Edelbrock RPM? Are we talking carb intakes? That will not work if you mean for a fuelie, 5.0 intakes aren't interchangeable with 351W's. Try TFS for that. ------------------ '91 LX Hatch, 17 ROH ZR6's, lowered, 3.73's, offroad H pipe, SN Cobra cat-back, ASP pullies, 14° timing, C&L 76mm MAF, 170A 3G, B&M Ripper on a T5 1991 LX Hatch 5.0L

07-13-2001, 07:25 AM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	yes it is a EFI and yes it can go on a 351, upper is Edelbrock Performer RPM and get a lower truck 351w from Edelbrock Thanks for pointing that out. I wrote it late last night Ok I found out how much it Flows after Extrude-Hone 290 cfm [This message has been edited by Stang Runner (edited 07-13-2001).]

07-13-2001, 01:17 PM	#4
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Out of the Box flow numbers straight from a 5.0 mag Performer: 215cfm Performer RPM: 231 cfm Victor Jr: 283 cfm Victor: 294 cfm Cobra: 205 cfm GT-40: 212 cfm TFS Street: 243 cfm TFS Track: 257 cfm TFS R: 279 cfm TFS 351: 271 cfm Holley: 268 cfm ------------------ Dustin Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119 http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

07-13-2001, 10:34 PM	#5
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Hey Thanks SaleenGTS for the ## Looks like I will get the TFS 351: 271 cfm and have them Extrude-Honed