T-5 wiring

tarmon8r · 02-08-2005, 06:41 PM

I was wondering what the wire off the top of the tranny is for? and what the wiring studs on the side is for? I think that one is for the reverse lights, but is the other one for the neutral safety switch or something? Thanks in advance.

gmhatr · 02-09-2005, 01:35 AM

The two on the side are the reverse lights but the one on the top I'm not for sure. when I blew out my stock T5 The WC HD T5 I got didn't have that place in it.

02-08-2005, 06:41 PM	#1
tarmon8r Registered Member Join Date: Jun 2002 Location: manassas, va Posts: 186	T-5 wiring I was wondering what the wire off the top of the tranny is for? and what the wiring studs on the side is for? I think that one is for the reverse lights, but is the other one for the neutral safety switch or something? Thanks in advance. __________________ 1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided

02-09-2005, 01:35 AM	#2
gmhatr Registered Member Join Date: May 2004 Location: Mattoon IL. Posts: 91	Re: T-5 wiring The two on the side are the reverse lights but the one on the top I'm not for sure. when I blew out my stock T5 The WC HD T5 I got didn't have that place in it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Confused, I need help on different fuel pump wiring methods.	5.0 Fiend	Windsor Power	12	10-14-2004 06:43 PM
5.0 swap and wiring	surfsup	Windsor Power	1	10-04-2004 11:24 AM
Where is Fog Light Wiring for 1999 Mustang?	ericcone	Small Ponies	2	08-21-2002 09:26 PM
Which wiring harness and computer do I have to have?	EazyE-CPT	Windsor Power	0	07-21-2002 11:33 PM
possible..87 wiring harness/95 eec iv	selecstangs	Windsor Power	0	12-20-2001 01:52 AM