mmff old mags (project white trash)

phantomfox89 · 07-19-2001, 01:31 PM

does anyone have the old mags from when they started this car to close to when they were done up to like june 2000 i have them all after that i am interested in building a car like that for my next mustang if you have the mags and want to get ride of them or sell them let me know thank you
phantomfox89@aol.com

92Rustang · 07-19-2001, 04:40 PM

I would try and get a hold of MM&FF. I believe they put out a 5.0 Tech guide that had the car start to finish. Good luck.
Welcome to the works.

------------------
Check my site for mod
www.fordmustanggt.com

[This message has been edited by 92Rustang (edited 07-19-2001).]

phantomfox89 · 07-19-2001, 04:54 PM

thank you for the welcome i have e-mailed mmff about the car but i have not heard back from them yet i want to use these as a guide because i do not know a lot about building car so i want somthing to go by

NOS_Notch · 07-19-2001, 07:52 PM

No info for you...but i heard you rip people off???
Saw it on the classifieds...like 3 times
Your name Ted Bender???

phantomfox89 · 07-19-2001, 09:04 PM

yes, are you talking about the shifter i got the address of the guy wrong (like 4 times ) i felt real bad about it so i sent him a money order for 1 and a half the amount the mistake was my own fault the my computer crashed i lost my a.o.l that is the reason for the new screen name that i have to use
no i did not rip him off on purpose i made a mistake with the address and then fixed it by sending out the money i do feel bad a hate to make an excuse so if he would like i will ship the shifter back to him and he can keep it and the money there is no way that i would want to destroy my credibilty over this transaction it was a mistake which i think i have corrected

SPEEDY88 · 07-20-2001, 08:42 AM

Can't we all just get along???????????????? Dem are fighting words!!!!

------------------
88GT-Bassani X-pipe,Two chamber flowmasters,3:73 gears, King Cobra clutch, Steeda clutch quadrant, pro 5.0, K&N, Hypertech chip, Underdrive Pulleys,High Volume oil pump....ALL POWERED BY MY FOOT!!!

StangFlyer · 07-21-2001, 01:56 PM

NOS_Notch's offensive post has been deleted. Furthermore, I think phantomfox89's project car question has been answered and this other matter is not a tech topic for the message board. You should handle that through private Email if it is not already resolved as phantomfox89 has stated.

------------------
Dan McClain, Editor
The Mustang Works Magazine
ICQ: 2937586 - AIM: DMcClain91GT
1991 Mustang GT - NOVI Supercharged 377 Stroker
1999 Ford Lightning SVT - 2000 Prototype updated by Roush

07-19-2001, 01:31 PM	#1
phantomfox89 Registered Member Join Date: Jul 2001 Posts: 3	mmff old mags (project white trash) does anyone have the old mags from when they started this car to close to when they were done up to like june 2000 i have them all after that i am interested in building a car like that for my next mustang if you have the mags and want to get ride of them or sell them let me know thank you phantomfox89@aol.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
white wheels on white GT	GhettoPop	Windsor Power	3	08-05-2003 04:09 PM
99GT vs. 2000 Lightning	wantapony2001	Stang Stories	52	01-04-2003 06:30 PM
Project White Turd - 1.5MPH Increase with Catback!	LXH89	Windsor Power	3	05-03-2001 09:32 PM

07-19-2001, 04:40 PM	#2
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	I would try and get a hold of MM&FF. I believe they put out a 5.0 Tech guide that had the car start to finish. Good luck. Welcome to the works. ------------------ Check my site for mod www.fordmustanggt.com [This message has been edited by 92Rustang (edited 07-19-2001).]

07-19-2001, 04:54 PM	#3
phantomfox89 Registered Member Join Date: Jul 2001 Posts: 3	thank you for the welcome i have e-mailed mmff about the car but i have not heard back from them yet i want to use these as a guide because i do not know a lot about building car so i want somthing to go by

07-19-2001, 07:52 PM	#4
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	No info for you...but i heard you rip people off??? Saw it on the classifieds...like 3 times Your name Ted Bender???

07-19-2001, 09:04 PM	#5
phantomfox89 Registered Member Join Date: Jul 2001 Posts: 3	yes, are you talking about the shifter i got the address of the guy wrong (like 4 times ) i felt real bad about it so i sent him a money order for 1 and a half the amount the mistake was my own fault the my computer crashed i lost my a.o.l that is the reason for the new screen name that i have to use no i did not rip him off on purpose i made a mistake with the address and then fixed it by sending out the money i do feel bad a hate to make an excuse so if he would like i will ship the shifter back to him and he can keep it and the money there is no way that i would want to destroy my credibilty over this transaction it was a mistake which i think i have corrected

07-20-2001, 08:42 AM	#6
SPEEDY88 Registered Member Join Date: Oct 1999 Location: TEXAS Posts: 110	Can't we all just get along???????????????? Dem are fighting words!!!! ------------------ 88GT-Bassani X-pipe,Two chamber flowmasters,3:73 gears, King Cobra clutch, Steeda clutch quadrant, pro 5.0, K&N, Hypertech chip, Underdrive Pulleys,High Volume oil pump....ALL POWERED BY MY FOOT!!!

07-21-2001, 01:56 PM	#7
StangFlyer Founder Join Date: Jun 1995 Location: Michigan Posts: 19,326	NOS_Notch's offensive post has been deleted. Furthermore, I think phantomfox89's project car question has been answered and this other matter is not a tech topic for the message board. You should handle that through private Email if it is not already resolved as phantomfox89 has stated. ------------------ Dan McClain, Editor The Mustang Works Magazine ICQ: 2937586 - AIM: DMcClain91GT 1991 Mustang GT - NOVI Supercharged 377 Stroker 1999 Ford Lightning SVT - 2000 Prototype updated by Roush