© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-15-2001, 06:13 PM | #1 |
Mustang Maniac
Join Date: Sep 2000
Location: GA, U.S.A
Posts: 2,266
|
Roll cages?
I know some of you guys got em in your cars. I need suggestions.
In less than 2 months, the stang gets stripped down to it's bare exoskeleton to be body-worked, painted, carpeted, and roll cage installed. I want this car set up so I can compete in True Street class. What point cage is required? 8,6? Manufacturers? I was looking at in MM&FF an saw NHRA roll bars from Maximum Motorsports for 79-93 Mustang. 6-point 1-3/4x0.134"-wall DOM seemless tube. has removeable door bars. Planning for tubular k-member and other goodies too. ----------------------------------------- 351W-powered 1979 Ford Mustang notchback Stock 5.8L under 4" cowl, C4 w/ shift kit Holley 750 cfm, Edelbrock Performer RPM intake 1 5/8" MAC shorty headers, Al driveshaft 2.5" Off road H-pipe, 2-chamber Flowmasters Front: 225/60/15, Rear: 255/60/15 Eagle GT II Weld wheels (15x6;15x8), 8.8" Rear w/ 3.55s 14 x 4” K&N air filter (getting the Xtreme setup someday) "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body |
08-15-2001, 07:03 PM | #2 |
Registered Member
Join Date: Apr 2000
Location: middleburg, fl, usa
Posts: 1,134
|
If you go 11.99 or quicker you have to have a 6 point roll cage and if I am not mistaken the swing out door bars are not legal but I might be mistaken. I would have it welded in before the paint and have them paint the roll cage when they paint the car.
The place that did mine built it and welded it in and they did a great gob and I would recommend them to anyone. They will even let you watch or help if you want to. They are in Kingsland GA. and the phone # is Dave (912) 729-1347 Ralph (912) 729-8897 They both do the work so you can call either one. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft |
08-15-2001, 07:06 PM | #3 |
Registered Member
Join Date: Apr 2000
Location: middleburg, fl, usa
Posts: 1,134
|
BTW: The name of the place is Performance Chassis.
|
08-16-2001, 07:04 AM | #4 |
Moderator
Join Date: Aug 2000
Location: Milan, OH
Posts: 2,699
|
At 11.99, you need a minimum of a 5-point (passengers side door bar not required). Swing out door bars are legal, at least to 9.99. At 9.99, you need the full 10 point cage with window net.
The MM roll bars are only legal if you weld the shock tower braces. Check out S&W Race Cars in PA. They make mustang specific kits in both mild and chromoly. I paid $149 for the kit and another $150 to have it welded in. Pictures are on my website. I'd suggest getting an NHRA rule book from your local speedshop and familiarizing yourself with the rules. The rules depend on how quick you plan on going. There's plenty more that you'll need to know with clutches, bellhousings, fuel lines, harnesses, etc. ------------------ Jeff Chambers Trophy Stock #3 11.462 Seconds / 117.43 MPH Chambers Racing Team |
08-16-2001, 05:29 PM | #5 |
Mustang Maniac
Join Date: Sep 2000
Location: GA, U.S.A
Posts: 2,266
|
Thanks for the advice guys.
Jeff, I'll get a rule book. Your tech article on your website is great. Thanks for the tip about leaving in the rear side panels inside the car b4 roll cage installation. I'm gonna have to go back there and read the whole article and some of the others. ------------------------------------------------------- 351W-powered 1979 Ford Mustang notchback Stock 5.8L under 4" cowl, C4 w/ shift kit Holley 750 cfm, Edelbrock Performer RPM intake 1 5/8" MAC shorty headers, Al driveshaft 2.5" Off road H-pipe, 2-chamber Flowmasters Front: 225/60/15, Rear: 255/60/15 Eagle GT II Weld wheels (15x6;15x8), 8.8" Rear w/ 3.55s 14 x 4” K&N air filter (getting the Xtreme setup someday) "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Questions on Roll Cages, Welding, and Ignition | BlackFireN2O | Windsor Power | 3 | 08-25-2002 08:01 AM |
Roll Cages???? Notchbacks!!!! | 88PONY | Windsor Power | 1 | 03-11-2002 09:48 PM |
Gathering info on roll cage installation. | Fox Body | Windsor Power | 5 | 02-25-2002 11:35 PM |
Roll Bar for a vert? | Chipdog | Windsor Power | 7 | 10-16-2001 05:07 PM |
Roll Cages? and 5pt. harness?? | 93CobraR | Windsor Power | 1 | 03-05-2001 07:27 AM |