Come on... Help me out! :-)

jz_mustang50 · 10-08-2001, 12:52 PM

I have a 91 Mustang GT Hatch, with a missing bracket I believe for the backseats. The bottom cushion does not sit down right, no matter how hard I push down. It seems like its supposed to hook in someplace, but it never does. What am I missing? There also seems to be about a 3in gap even when i push the cushion down between the floor and the bottom front of the cushion. When I sit on it, i'm at an angle with the front of the cushion pushing upwards.... Sounds simple eh? This is more tougher then doing my rear suspension! AHH HELP PLEASE :-)

------------------
Joe Zemaitis, Grand Rapids Michigan

1991 Mustang GT. Mods to date: 4.10 rear end, new POSI, aluminum driveshaft, AOD w/ shift kit, 2 1/2 off road h-pipe, 2 1/2 flowmasters and 2 1/2 tail pipes. Electric fan, Removed air pump and egr tube. Hotchkins upper and lower control arms. New energy suspension rear busings. Hoosier Quick Time Pro 27x10.5x15 and bolt on subframes soon to be welded. Everything else is STOCK. Totally stock ENGINE. 14.29@96 with 130k miles.

Stang Runner · 10-08-2001, 04:01 PM

Here is a pic. that mught help you.

If you are too lost I could call you.

------------------
14.28@103.0 on a G-Tech Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C
Drive Train: 3.55, T-5z,

Real power STUFF I Have and will put some time: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump NOS Dry 75HP, AFR 165 58cc, GT-40 Intake.
Next to get: Rocker Arms,Cam,Injectors 24, What might I need???See It at www.computerconquest.com

[This message has been edited by Stang Runner (edited 10-08-2001).]

[This message has been edited by Stang Runner (edited 10-08-2001).]

jz_mustang50 · 10-08-2001, 06:00 PM

Hey, thanks for the pictures, but yours look alot different then mine. I took pictures of what I'm upagainst, and its confusing! I have a couple of different brackets then yours. Is your car older? Email me and I can email you back with some pictures of my setup. And that goes for anyone else that could help... I have pictures!!! If you can see something I'm not feel free to email me at jzsport79@aol.com or IM me if I'm ever on.

Thanks!

Thanks

------------------
Joe Zemaitis, Grand Rapids Michigan

1991 Mustang GT. Mods to date: 4.10 rear end, new POSI, aluminum driveshaft, AOD w/ shift kit, 2 1/2 off road h-pipe, 2 1/2 flowmasters and 2 1/2 tail pipes. Electric fan, Removed air pump and egr tube. Hotchkins upper and lower control arms. New energy suspension rear busings. Hoosier Quick Time Pro 27x10.5x15 and bolt on subframes soon to be welded. Everything else is STOCK. Totally stock ENGINE. 14.29@96 with 130k miles.

10-08-2001, 12:52 PM	#1
jz_mustang50 Registered Member Join Date: Sep 2001 Location: Grand Rapids, Michigan, USA Posts: 50	Come on... Help me out! :-) I have a 91 Mustang GT Hatch, with a missing bracket I believe for the backseats. The bottom cushion does not sit down right, no matter how hard I push down. It seems like its supposed to hook in someplace, but it never does. What am I missing? There also seems to be about a 3in gap even when i push the cushion down between the floor and the bottom front of the cushion. When I sit on it, i'm at an angle with the front of the cushion pushing upwards.... Sounds simple eh? This is more tougher then doing my rear suspension! AHH HELP PLEASE :-) ------------------ Joe Zemaitis, Grand Rapids Michigan 1991 Mustang GT. Mods to date: 4.10 rear end, new POSI, aluminum driveshaft, AOD w/ shift kit, 2 1/2 off road h-pipe, 2 1/2 flowmasters and 2 1/2 tail pipes. Electric fan, Removed air pump and egr tube. Hotchkins upper and lower control arms. New energy suspension rear busings. Hoosier Quick Time Pro 27x10.5x15 and bolt on subframes soon to be welded. Everything else is STOCK. Totally stock ENGINE. 14.29@96 with 130k miles.

10-08-2001, 04:01 PM	#2
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Here is a pic. that mught help you. If you are too lost I could call you. ------------------ 14.28@103.0 on a G-Tech Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C Drive Train: 3.55, T-5z, Real power STUFF I Have and will put some time: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump NOS Dry 75HP, AFR 165 58cc, GT-40 Intake. Next to get: Rocker Arms,Cam,Injectors 24, What might I need???See It at www.computerconquest.com [This message has been edited by Stang Runner (edited 10-08-2001).] [This message has been edited by Stang Runner (edited 10-08-2001).]

10-08-2001, 06:00 PM	#3
jz_mustang50 Registered Member Join Date: Sep 2001 Location: Grand Rapids, Michigan, USA Posts: 50	Hey, thanks for the pictures, but yours look alot different then mine. I took pictures of what I'm upagainst, and its confusing! I have a couple of different brackets then yours. Is your car older? Email me and I can email you back with some pictures of my setup. And that goes for anyone else that could help... I have pictures!!! If you can see something I'm not feel free to email me at jzsport79@aol.com or IM me if I'm ever on. Thanks! Thanks ------------------ Joe Zemaitis, Grand Rapids Michigan 1991 Mustang GT. Mods to date: 4.10 rear end, new POSI, aluminum driveshaft, AOD w/ shift kit, 2 1/2 off road h-pipe, 2 1/2 flowmasters and 2 1/2 tail pipes. Electric fan, Removed air pump and egr tube. Hotchkins upper and lower control arms. New energy suspension rear busings. Hoosier Quick Time Pro 27x10.5x15 and bolt on subframes soon to be welded. Everything else is STOCK. Totally stock ENGINE. 14.29@96 with 130k miles.