Will a 94 cobra intake fit a 90 GT?

leo · 02-03-2001, 09:53 AM

I got a really good deal on one but I wanna make sure it will fit my 5.0, same block so it should fit right???

Thanks,
Leo

------------------
1990GT 5.0 302, T-5, 3.73's, K&n Air filter, Dynomax Super Turbo Exhaust, Hypertech Chip, MSD 6A Ignition, RAM Clutch, Motorsport 3 core, Offroad H-pipe.

93CobraR · 02-03-2001, 10:38 AM

Nope. It won't work becuase it has a elbow on the upper that can't be taken off. Also the lower is missing a hole for a sensor I believe.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 13.012
Best MPH 104
Best 60' 1.816

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

02-03-2001, 09:53 AM	#1
leo Registered Member Join Date: Oct 1998 Location: Dallas, TX Posts: 261	Will a 94 cobra intake fit a 90 GT? I got a really good deal on one but I wanna make sure it will fit my 5.0, same block so it should fit right??? Thanks, Leo ------------------ 1990GT 5.0 302, T-5, 3.73's, K&n Air filter, Dynomax Super Turbo Exhaust, Hypertech Chip, MSD 6A Ignition, RAM Clutch, Motorsport 3 core, Offroad H-pipe.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT-40 Long Block and Cobra Intake	RMARIANI	Windsor Power	12	04-21-2004 12:55 PM
'02 GT Drop top Vs. '94 Cobra	EZRIDN	Stang Stories	3	03-26-2004 04:23 PM
HP limit of cobra upper intake.	Dark_5.0	Windsor Power	3	03-03-2004 10:03 AM
Cobra Engine Swap...Ways to improve my 98 GT...	xtrememach1racer	Modular Madness	3	10-31-2002 11:23 AM
Cobra Intake?	95mustanggt	Windsor Power	5	10-01-2002 09:55 AM

02-03-2001, 10:38 AM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Nope. It won't work becuase it has a elbow on the upper that can't be taken off. Also the lower is missing a hole for a sensor I believe. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html