I would start at 38-39psi with vacuum off and go up in 1/2lb increments until you feel the power drop off. Make sure you read the plugs right after running hard not after idle, this will tell you if it is rich or lean. I was running 42psi with my set-up, before the custom cam or ported heads.
------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!