© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
09-13-2001, 04:03 PM | #1 |
Registered Member
Join Date: May 1999
Location: sloatsburg
Posts: 261
|
slicks who's runnin them on a stock rear
i was just curious too see who is running slicks on there stock rear with just gears i have a set and i really want to use them but the only work i have done to my rear is a set of 373 gears also how does everyone launch there car with them on a stock rear also if and when you broke something from using what was it the axels the dif the gears cause i have a couple pairs of axels laying around and it wouldnt be a problem to change them just curious. o yeah the power going to the rear is a 306 with edlbrock 6037 heads extruned honed intake b303 full mac exuast from front to back a 100 shot but not until 2nd and a tremec thanks for any replies
|
09-13-2001, 06:05 PM | #2 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
I do.
------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 332RWHP, 350rwtq |
09-13-2001, 06:54 PM | #3 |
Tubbed and Juiced
Join Date: Mar 2001
Location: Tulsa, Oklahoma
Posts: 1,861
|
Your clutch will probaly go out first if you have a stocker. I had slicks and launched at 4000-4500 if I remember right.....Man it launched hard.
------------------ 1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, Have many other parts 4 sale. All parts for sale now. 2000 Camaro SS-A4, 13.7's bone stock. 1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more! |
09-13-2001, 07:10 PM | #4 |
Registered Member
Join Date: Jun 2001
Location: chilliwack b.c. canada
Posts: 25
|
I can think of manythings that will break b4 your axles and certianly not your diff assembly itself, umm stock driveshaft dont like much abuse, your clutch, first gear,
but you dont have the torque to break stuff that quick so go ahead and have fun!!!!!!! |
09-13-2001, 07:17 PM | #5 |
Registered Member
Join Date: Jun 2001
Location: chilliwack b.c. canada
Posts: 25
|
BTW what are you doing extrude honeing your intake thats freakin expensive shiat there are much cheaper ways to getting better flow for your car is it a stock intake or did you hone an after market intake if you did you have way too little cam for you intake and I'd work on those gears (stock gears 2.73, 3.08, 3.27's?)too, I could see your car being miles faster if you spent money in the right spots
see ya Sean |
09-14-2001, 12:46 AM | #6 |
Registered Member
Join Date: May 1999
Location: sloatsburg
Posts: 261
|
well i have a stock intake extrune honed because im really into street racing and that gives off an impression of a stock intake also in the rear i have a set of 373 that i like very much i also have a HD clutch in there two.
|
09-14-2001, 01:16 PM | #7 |
Registered Member
Join Date: Dec 1998
Location: NJ
Posts: 219
|
My cousin has gone 12.2 with 3.73 gears, stock diff., stock axles, and 26x8.5 tires. I make around 300 RWH and with a 5000 launch on slicks i destroyed an auburn unit.
|
09-14-2001, 03:26 PM | #8 |
Registered Member
Join Date: Jul 2001
Location: westville, fl 32464
Posts: 10
|
I used to have a '94 GT that had an F303 cam, factory heads, intake, clutch, driveshaft, axles,......the car was factory except for the F cam, and a set of 3.73s. I run slicks on the car. the best I got with streets was a 9.96 (1/8 mile) and I launched at 2,000 rpm! I bolted on a set of 28x10.50 slicks and I got a whopping 6,000 rpm launch that turned a 8.99, but i only run three times in fear that I was going to break something the whole time.
------------------ '88 coupe 351W (.060" over) trickflow "R" series heads, 1.6 ratio crane gold series rockers. Miloden 7qt oilpan trickflow street series intake, with 70mm throttle body, and 77 Pro-M mass air meter. |
09-14-2001, 06:30 PM | #9 | |
Registered Member
Join Date: Aug 2001
Location: joplin mo usa
Posts: 10
|
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear brake blocks before front break | nielsmobers | Classic Mustangs | 3 | 10-06-2003 02:26 PM |
want rear disk without changing overall length of rear....please help!!! | dragstang86 | Windsor Power | 1 | 07-31-2003 06:32 PM |
How Wide(<--->) Is The Stock Rear End On My 88 GT??? | BowTie Eater 5 Liter | Windsor Power | 1 | 01-24-2002 10:39 AM |
Slicks vs Rear end | cyberstang5.0 | Windsor Power | 3 | 11-07-2001 08:29 PM |
anyone have a pic of their GT with the stock wing and cobra rear bumper | Brian88 | Windsor Power | 2 | 03-03-2001 06:47 AM |