© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-23-2003, 12:04 AM | #1 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
some new best times
new combo consists of ported GT40P heads, ported explorer intake, B303 retarded 4deg, MAC longtubes, 4cyl springs, lakewood 70/30's... blah blah blah
First day of the season was today, and it wasn't too great of a day for racing. The temp was good, but there was a significant headwind.(I've raced in similar conditions and was 0.4seconds off of my best on that day) Best NA was a 12.76@105 on a 1.69 60ft I know with a little more hook, more aggressive driving and no head wind, it should go 12.50's The last run I decided to throw the bottle at it. Had it on the floor of a truck with the heat on it to warm it some, but still couldnt get the pressure above 700psi (i know i need a bottle heater) With the 100hp jets, and only 700psi, it was probably only giving 80hp. I've attached a picture of the timeslip (right lane), needless to say I was VERY excited to receive it even though it only hooked to a 1.74 60ft 125shot with 950-1000psi, new slicks, and no head wind should be a blast next time out Whats your guesses on what I can get outta it later this season?
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
03-23-2003, 12:52 AM | #2 |
Registered Member
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
|
Those are some great times, I have jet to run in the 11's and can't wait. I'd guess some 11.60's?? with a good 60, I thinkyou might get in there.
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires. my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250 NEW(oct20/02)14.58@95mph 2.3 60 ft corrects to:13.86@100 66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver 12.3@110 @ 4000ft 1.69 60 ft corrects to:11.69@115 |
03-23-2003, 03:02 PM | #3 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
11.60's was my goal I set from the beginning with this combo and 125shot. I think it will do it when the conditions are right, and I get my new slicks on there.
Just about to pick up an anderson N4 cam too, so that won't hurt
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
03-23-2003, 10:13 PM | #4 |
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
Your going pretty good there with gt-40's! hey fivohpatrol, i see you said your cam is retarded 4 degrees, im putting in an e-cam in a few day, do you recommend i reatrd it? i've heard retarding 2 degrees is worth a gain, with my mods, what do you think?
thanx, anyone that replies.....
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
03-23-2003, 10:42 PM | #5 |
I'd rather be basketweaving
Join Date: Feb 2000
Location: Indianapolis
Posts: 2,551
|
Retarding in general will move your power up in the RPM range.
The reason I retarded mine was because I have heard from numerous sources that there are 5degrees of advance built into the B303 cam. I don't think you'll really see any gain with retarding the E cam, I think it was meant to install "straight up". But then again, I have been wrong on many occasions I just purchased an anderson N4 cam today, so hopefully that will help out some. anyone wanna buy a B303 ?
__________________
NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Check out these times and tell me how i can get better! | 1jimmy__d | Stang Stories | 6 | 06-24-2003 01:07 PM |
Track Times With the new Tires!!!!! | Stang Runner | Stang Stories | 6 | 10-20-2002 08:31 PM |
New Track times On the good old SD and STOCK Short block | Stang Runner | Stang Stories | 1 | 10-10-2002 06:25 PM |
4cyl times and #'s?? | HiFlow5 0 | Blue Oval Lounge | 11 | 03-25-2002 10:23 AM |
New times new times .what would traction net me? | SKYWLKR | Windsor Power | 3 | 01-14-2002 08:34 PM |