1.7 ratio rocker arms

bcinyuz · 03-05-2001, 12:46 AM

What would be a good set of 7/16" pedestal mounted full roller rocker arms,(Aluminum or Steel), that would not have to have guide plates, they needed to be 1.7 ratio, and should not be over $250.

03-05-2001, 12:55 PM

The crane 1.7(stock on 93 cobra's) are pretty good for the price. Ussally they can be found for about $180-$200 new or $100-$150 used....

------------------
Mike

Sold my 88GT Aug Y2K

Just got T-top 86GT 11-18-2000

[This message has been edited by Myke_y2k (edited 03-05-2001).]

fastang · 03-05-2001, 02:38 PM

I bought my Crane energizers from summit cheap. Im pretty sure that they were under 200 bucks, theyre realy nice.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

CJ's94GT · 03-05-2001, 05:35 PM

Quote:

Originally posted by bcinyuz:
What would be a good set of 7/16" pedestal mounted full roller rocker arms.

7/16" pedistal mount? Do you mean stud mount?
What heads are they going on?

03-05-2001, 12:46 AM	#1
bcinyuz Registered Member Join Date: Aug 2000 Location: lodi,ca,usa Posts: 86	1.7 ratio rocker arms What would be a good set of 7/16" pedestal mounted full roller rocker arms,(Aluminum or Steel), that would not have to have guide plates, they needed to be 1.7 ratio, and should not be over $250.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rocker Ratio.	Slimjim	Windsor Power	6	12-11-2002 11:37 AM
rocker arms	drtbiker	Windsor Power	13	10-30-2002 12:58 AM
FS: Ported TW heads, pushrods, and rocker arms!	Greystang302	Blue Oval Lounge	0	05-04-2002 01:53 PM
can i inst. rocker arms without removing lifters?	rob90gt	Windsor Power	3	02-02-2001 04:09 AM

03-05-2001, 12:55 PM	#2
Myke_y2k Guest Posts: n/a	The crane 1.7(stock on 93 cobra's) are pretty good for the price. Ussally they can be found for about $180-$200 new or $100-$150 used.... ------------------ Mike Sold my 88GT Aug Y2K Just got T-top 86GT 11-18-2000 [This message has been edited by Myke_y2k (edited 03-05-2001).]

03-05-2001, 02:38 PM	#3
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I bought my Crane energizers from summit cheap. Im pretty sure that they were under 200 bucks, theyre realy nice. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, off road pipes, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors