speed density
 

what mods. will a speed density system handle? and still be driver friendly?

There is a racer named Brian Smith who is running GT-40 heads and a Cobra intake. I am not sure what he is running but it's really fast and with speed density. He is at www.stangcrazy.com. http://www.mustangworks.com/interact...rd/biggrin.gif

------------------
86 GT T-tops, AOD, B&M shift kit and hammer shifter, ROH wheels, K&N, Timing,MAC headers, 2.5 off road H, 2.5 American Thunder, 87 spindles, rear disc,SS lines, BBK 1.5, poly bushings, Crutchfield front kick panel speakers.

You can touch everthing but the cam!
Biggest improvement is 1.7 rockers!!!
http://www.mustangworks.com/interact...rd/biggrin.gif http://www.mustangworks.com/interact...rd/biggrin.gif http://www.mustangworks.com/interact...rd/biggrin.gif

------------------
88 NOTCH DSS 331CI C-4 BRAKE 4:10'S 11.5-1 DART IRON HEADS X-CAM 1.7 ROCKERS 8PT. CAGE BEST 10.9@125MPH 100% STREETALBE TO ME!!!

88Workcar a member on this site runs speed density with a B303 cam,edelbrock heads,cobra intake,flowtech long tubes,4.30 gears.He run's low 12's with no problems at all.

------------------
http://www.geocities.com/mustanguy27/Sig3.BMP Paxton Blown 87GT
Mustang..it's not just a car,it's an attitude

sounds like we are in the same boat..i,m looking at going mass air...

How fast do you want to go?

------------------
Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac,
12.38 @ 111.28 1.80 60ft 28X10 street tires
12.17 @ 112 26 X 10 slicks
http://www.mustangworks.com/mustangs/pictures/Listing347-slot3.jpg

just trying to make it a little faster not set land speed record i drive it about 60 miles a day to work it has: 3.73 rears,underdrive pullys, air silencer removed timing bumped,2.5 w\ h- ,pipes i also have a complete upper and lower of a 89 gt will this help?

[This message has been edited by XZILR8TION (edited 01-11-2001).]

not trying to leave the ground or anything, just want it a little faster than stock

I've gone 11.99 speed density,stock cam,AOD..

------------------

I've gone 11.99 speed density,stock cam,AOD..

------------------

I went 11.72 @ 116, 100 shot of happy juice. It was a bad pass. I spun, let up, got in it again, then missed 5th at the end. Right now my best motor pass is 12.17 @ 112+. And if I ever finish all the problems that I am having, I should brake 11s with the motor. Speed density is great, people just are scared of it because of old stories that have dressed it out to be a horror. I have simple mods, heads, cam, intake, pullies, headers, offroads, 4.30s, 28 x 10 tires, no sway bars, air bags, 70/30s, fuel press reg, MSD 6A & blaster II coil, 3core radiator, 190stat, alumn drive shaft, 4 clutches and a heavy sping in the rear end, center force clutch, A and a attitude http://www.mustangworks.com/interact...oard/smile.gif

------------------
Jason B Johnson 88LX,speed density,edel heads,4.30s,B-303,cobra,tremac,
12.38 @ 111.28 1.80 60ft 28X10 street tires
12.17 @ 112 26 X 10 slicks
http://www.mustangworks.com/mustangs/pictures/Listing347-slot3.jpg