MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Speed Density and Timming? (http://forums.mustangworks.com/showthread.php?t=49818)

Michael Smith 06-14-2007 07:38 AM
Speed Density and Timming?
 
Car is an 88GT it has a GT40 intake, shorty equal length headers, 1.6 roller rockers, and a B-cam they are the only mods all the rest is stock. Any suggestions on how much timming to start bumping up with. At this point the timming is at 14 spout connector disconnected but realy how much timming do you think it can take before it losses power just looking for the range say 12-16? Thanks for any help.

USMC302 06-15-2007 10:25 AM
Re: Speed Density and Timming?
 
Keep bumping it up until it pings, then back it off 2 degrees, that's about all your gonna get out of it with the current octane your running, if you step up to 93 ans stick with it, the timing will go higher until pinging....good luck.

tmoss 06-17-2007 09:10 AM
Re: Speed Density and Timming?
 
What idle do you have to set to get the SD to idle with the B cam?


All times are GMT -5. The time now is 07:37 PM.