Speedometer Gear color

redsn95vert · 05-26-2007, 05:01 PM

I just had my P.O.S. AODE freshened up and I think they installed the wrong Speedometer gear. My speedo is off and the odometer isn't working. When I pulled the vehicle speed sensor all but one tooth was sheared off. I did the gears so long ago, I can't remember how many teeth and color I need for a '95 AODE w/ 3.73 gears and 245/45ZR17 tires. Does anyone know what gear I need.
Thanks
B.J.

redsn95vert · 05-28-2007, 01:17 PM

I think I figured out what they did wrong.....They installed a white 23 tooth gear for a manual trans. I ordered a 392-STE-17271-J
Automatic 8-Tooth 3.55 Ratio / Black 23 Speedo Gear from Steeda Sat nite. Does anybody know what the difference between the man and auto 23 tooth gear is? The pics of them look almost identical.
Thanks
B.J.

pearce9906 · 11-24-2007, 12:00 PM

I think the difference between the driven gear is the tip at the end of the gear is longer on an automatic, couldn't tell you that for sure, but it seems i remember that from somewhere in the past.

05-26-2007, 05:01 PM	#1
redsn95vert Registered Member Join Date: Jul 2000 Location: Rochester Posts: 323	Speedometer Gear color I just had my P.O.S. AODE freshened up and I think they installed the wrong Speedometer gear. My speedo is off and the odometer isn't working. When I pulled the vehicle speed sensor all but one tooth was sheared off. I did the gears so long ago, I can't remember how many teeth and color I need for a '95 AODE w/ 3.73 gears and 245/45ZR17 tires. Does anyone know what gear I need. Thanks B.J. __________________ 95 GT convertable, ported+polished GT40 heads, port matched upper and lower Cobra intake manifold, Flowthech headers, Catco hi-flow h-pipe with 2 hi-flow cats, Mac true fit catback exhaust, 3.73 gears, underdrive pullies, Edelbrock 70mm throttle body, Mac cold air intake, FMS 24lb injectors, Granatelli 75mm mass air

05-28-2007, 01:17 PM	#2
redsn95vert Registered Member Join Date: Jul 2000 Location: Rochester Posts: 323	Re: Speedometer Gear color I think I figured out what they did wrong.....They installed a white 23 tooth gear for a manual trans. I ordered a 392-STE-17271-J Automatic 8-Tooth 3.55 Ratio / Black 23 Speedo Gear from Steeda Sat nite. Does anybody know what the difference between the man and auto 23 tooth gear is? The pics of them look almost identical. Thanks B.J. __________________ 95 GT convertable, ported+polished GT40 heads, port matched upper and lower Cobra intake manifold, Flowthech headers, Catco hi-flow h-pipe with 2 hi-flow cats, Mac true fit catback exhaust, 3.73 gears, underdrive pullies, Edelbrock 70mm throttle body, Mac cold air intake, FMS 24lb injectors, Granatelli 75mm mass air

11-24-2007, 12:00 PM	#3
pearce9906 Registered Member Join Date: Nov 2007 Location: OHIO Posts: 20	Re: Speedometer Gear color I think the difference between the driven gear is the tip at the end of the gear is longer on an automatic, couldn't tell you that for sure, but it seems i remember that from somewhere in the past.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
speedometer gear installation?	squid	Windsor Power	2	12-12-2002 12:42 AM
3.73 speedometer gear change?	5.0PiMpin	Windsor Power	13	03-29-2002 07:06 PM
3.73 Gear - Speedometer calibration	SteveK	Modular Madness	2	07-06-2001 08:51 AM
speedometer gear	SN95 5.0	Windsor Power	23	03-26-2001 04:43 PM
speedometer driven gear	ranger13	Classic Mustangs	2	12-06-1999 11:18 AM