First thing to check is see if the wear sensor on the brake pads is touching the rotor if it is replace the pads. If brakes are ok I'd pull the rotors and check bearings. If you do put new pads on its a good idea to repack bearings and don't forget the grease seals too.
Bill
__________________
Bill Heiser
90 Convertable 5.0 LX, ported E7s w/ THumper valve job, TFS street, FR 65mm TB, B cam w/1.7 cobra rockers, kirban AFPR, Mac CAI, Mac Headers, off road h, 3 chamber flows, Crane ign. box, 3:73s, Art Carr AOD & 2600 converter
|