Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
05-11-2001, 10:00 AM
|
#1 |
|
Registered Member
Join Date: May 2001
Location: Wilmington, DE
Posts: 13
|
stalling problem?
I just got my 91 GT w/ T-5 back two days ago. It just got a full rebuild w/ Trick Flow TW heads, E-303 w/ 1.7 roller rockers, Cobra intake, 24lb injectors (set @ 42 psi), Pro-M mass air meter and alot more. The car idles fine and runs great, but it likes to stall when I take it out of gear to stop for a light. As far as I know it really shouldn't be doing this. Any ideas?
|
|
|
|
05-11-2001, 12:29 PM
|
#2 |
|
Registered Member
Join Date: Jan 1999
Location: Clayton, North Carolina, USA
Posts: 803
|
Sounds like your typical surging idle problems. Many have had this problem with mods like yours, including myself. But, you can usually correct them with playing with the idle RPM. I have to run mine at around 950 rpm at idle to prevent surging. Remember to adjust your TPS after making changes to the idle screw, and disconnect your battery to clear your processor. Check that your throttle body is clean and I assume your mass air is calibrated for the 24 pounders.
Hope that helps some... ------------------ fordgasm CLICK HERE to see my 87 GT |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Starting and Stalling 1988 4-cyl Convt. | ziggy555 | Small Ponies | 10 | 05-17-2008 03:11 AM |
| Stalling Problem | RoushRacing6N17 | Windsor Power | 0 | 01-16-2004 08:36 PM |
| Please help stutering problem | Just me | Windsor Power | 10 | 10-18-2002 02:37 PM |
| To all who asked me to check the codes for stalling problem, read please. | HAITHAM | Windsor Power | 2 | 09-29-2001 07:09 AM |
| Surging Problem - Help | Lawless | Windsor Power | 32 | 08-19-2001 10:57 PM |