MustangWorks.com : Ford Forums - View Single Post

bmxmon · 11-08-2007, 05:57 AM

I would say an oil change and flush the coolant. Spin the oil pump shaft to get the oil up everywhere. Is there still 2yr old gas in it? That might be bad, unless you put stabill in it, though I dont know if that can last 2yrs either... I wondering if putting some penetrating oil into the cylinders would be a good idea or not, in case of rust between the wall/piston/rings. Might want to see what others recommend as far as that goes.
________________
Also, it probably wouldnt hurt to change the transmission fluid.

11-08-2007, 05:57 AM	#2
bmxmon Registered Member Join Date: Mar 2004 Location: Minnesota Posts: 950	Re: start after 2 years? I would say an oil change and flush the coolant. Spin the oil pump shaft to get the oil up everywhere. Is there still 2yr old gas in it? That might be bad, unless you put stabill in it, though I dont know if that can last 2yrs either... I wondering if putting some penetrating oil into the cylinders would be a good idea or not, in case of rust between the wall/piston/rings. Might want to see what others recommend as far as that goes. ________________ Also, it probably wouldnt hurt to change the transmission fluid. __________________ Alex