starter bolt

jhess87 · 05-09-2001, 07:35 PM

Can someone tell me how to get that stinkin second bolt on my starter?? its an 87 5.0 auto and my hands are big!!any help is VERY much appreciated.

Unit 5302 · 05-09-2001, 08:22 PM

If you have one, a long extension on a 1/4" drive rachet should be able to help you out.

DaveR_GT · 05-09-2001, 09:01 PM

I was able to put together about every extension I had and go through the K-member above the lower a-frame and get it from the front wheel well opening.

------------------
'92 GT conv.
TFS heads, GT40, Powerdyne 9#, AOD, 3.73...

jhess87 · 05-09-2001, 09:04 PM

thanks you very much for the help guys!!!!! It helped me out a lot.

05-09-2001, 07:35 PM	#1 (permalink)
jhess87 Registered Member Join Date: May 2001 Location: tulsa ok Posts: 3	starter bolt Can someone tell me how to get that stinkin second bolt on my starter?? its an 87 5.0 auto and my hands are big!!any help is VERY much appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Starter problem....still there	Hethj7	Windsor Power	18	07-23-2006 06:17 PM
Quick Starter Install Question	Evil Joe	Windsor Power	3	09-16-2003 09:50 PM
Putting in clutch pedal after starter install now produces very high pitched whine	crazypete	Windsor Power	3	08-18-2003 09:51 PM
Help!! Starter problem.	DRASTiK	Windsor Power	2	04-07-2002 04:51 PM
help quick, 93 starter in 87GT problems	fiveohpatrol	Windsor Power	2	06-21-2001 07:22 AM

05-09-2001, 08:22 PM	#2 (permalink)
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,237	If you have one, a long extension on a 1/4" drive rachet should be able to help you out.

05-09-2001, 09:01 PM	#3 (permalink)
DaveR_GT Registered Member Join Date: Apr 2001 Location: W. Springfield, PA Posts: 65	I was able to put together about every extension I had and go through the K-member above the lower a-frame and get it from the front wheel well opening. ------------------ '92 GT conv. TFS heads, GT40, Powerdyne 9#, AOD, 3.73...

05-09-2001, 09:04 PM	#4 (permalink)
jhess87 Registered Member Join Date: May 2001 Location: tulsa ok Posts: 3	thanks you very much for the help guys!!!!! It helped me out a lot.

Sponsored Links