Starting problem's
 

I just installed a new cam and timing chain in my car everything went back together great. Started the car and it ran great for a while then it sounded like it was running out of gas. if you give to some gas it sounded like it was hitting on half the cylinders you can take foot off gas and it shuts off now it's not starting at all . I replaced fuel filter and fuel pump with new pump i can hear the pump prime up and there is great fuel pressure at fuel line and there is spark also at plugs there new also.what should i check now I'm running out of ideas.

Re: Starting problem's
 

Update. I changed out the ECU and the car started up and is running but my code reader is getting injector out of balance reading. Is that a bad injector?

Re: Starting problem's
 

are the injectors all pluged in correctly

Re: Starting problem's
 

Yeah i checked all plugs to injectors also changed injectors with new frp 19lb inj. and still getting the same code after clearing the eec.

Re: Starting problem's
 

one quick question what cam are u using?if its not a ford racing cam what are all the specs listed on the cam card ,also what is the firing order printed on the cam card?is the new computer from a 5.0 mustang?did all of your problems start when u installed the cam?