![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Feb 1999
Location: Indianapolis, IN
Posts: 963
|
![]() My mods can be seen in my sig. I am leaning torwards the track heat but when I e-mailed trickflow they said to go with street heat. I also plan on adding a 70mm Tb and a 150 shot (wet) in the near future, along with some other minor stuff.
Which intake should I go with?
__________________
04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out. |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Apr 2000
Location: middleburg, fl, usa
Posts: 1,134
|
![]() I would go with the street heat unless you are planning on adding a little bigger cam. You really don't need the extra rpm potential provided by the track heat. If you plan on adding a bigger cam and maybe some head porting go with the track heat.
Also on the EFI I would go with a dry n20 kit and not the wet to help eliminate the chance of a nitrous backfire through the intake.
__________________
James Cox RHC Member #44 nochevy@hotmail.com 1991 Mustang LX Dart iron eagle block, 4340 28oz 347 crank, 4340 h-beam rods, probe ultra light pistons canfield heads “race ported by Brent Frazier”, solid roller cam and lifters “custom grind”, kooks 1 7/8" race headers, and much more. Engine built by Brent Frazier. |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: May 1999
Location: Georgia
Posts: 3,866
|
![]() i would go with the NOS big shot plate system, which is wet, but doesnt travel throught he upper, eliminateing any backfire concerns.
Why change your manifold at all? I think the cobra manifold is good for your combination as it is. |
![]() |
![]() |
![]() |
#4 |
Tubbed and Juiced
Join Date: Mar 2001
Location: Tulsa, Oklahoma
Posts: 1,861
|
![]() ***My mods can be seen in my sig. I am leaning torwards the track heat but when I e-mailed trickflow they said to go with street heat. I also plan on adding a 70mm Tb and a 150 shot (wet) in the near future, along with some other minor stuff.
Which intake should I go with? Ok...Who do you think knows more about Trick Flow intakes, us or Trick Flow themselves? If they told you to go with the street heat that is what I would go with. |
![]() |
![]() |
![]() |
#5 | |
Registered Member
Join Date: Mar 2000
Location: Springfield, Ma, usa
Posts: 706
|
![]() Quote:
__________________
NewEngland Auto www.baystategearheads.com -91 Mustang Coupe, ex 4cyl (sold) -99 F150, 3" lift, 35" Procomps, Magnaflow exhaust |
|
![]() |
![]() |
![]() |
#6 |
RICE taste like Chicken
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
|
![]() Your cam is a low rpm cam....what I mean by that is that it peaks out around 5500. The Street head's power bank is listed as "idle to 5500" The Track Heat is listed higher....about like the Holley, but performs nowhere like it. If you change cams or port, I'd skip the Trach Heat and go with the Holley, but until then stick with the Street Heat.
__________________
Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: May 1999
Location: SAN ANTONIO, TEXAS, USA
Posts: 611
|
![]() In my opinion, go with the track heat. I have a friend with the track heat on his car (SN95). He currently has a 331, but when he had his 302, he was running the TFS heads and stage one cam with the street heat. His best was a high 12 @ ~103-104mph, he switched to the track heat (exchange with another guy he knew) in anticipation of the 331. While still running the 302, he increased his trap speeds to a high 105mph with just the intake change. He is now looking for a better intake for his 331 (hate to tell him, but I told him so)
The #s on those intakes are for marketing and usually that only. I was told time and time again that my intake was too big for my application, but I sure had a smirk on my face when I was pulling them. TFS also told me my valve springs were ok for my application since I was not reving past 6000rpm. Well how about an ~(calculated)3-4mph increase with just the valve spring replacement. When they say an intake has a certain rpm range, it usually means where it would like to make the most power if all else was stock This always not the case ofcourse, but I have come to find out this IS the case with the TFS products. I would stay with the intake U have now till U get all the other parts ready to be put in. BTW the TFS street heat WILL NOT make ANY power over the Cobra one, in other words a waste of money. Sorry for the long winded one ![]()
__________________
Black SN95 TFS heads, Holley intake, AFM B-2 cam, 12.9 @110mph best ET 13.06 @111mph best MPH After gutting out clogged cats and a much better tune. Took Nitrous out for warranty work ![]() |
![]() |
![]() |
![]() |
#8 |
RICE taste like Chicken
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
|
![]() I don't know....I just don't see a two mph increase in those intakes....especially with the Stage 1 cam. I think he hay have had a better tune. The Holley is the only Intake that I have ever seen a 2 mph increase on. The Track Heat only flows 8 cfm more than the Street and the Holley flows 16.
Also, the Street Heat made 13 more rwhp with my car on the dyno than my old Cobra. Before the Blower and Stroker. I guess you could say it is all in the tune, but my timing and fp was the same with both setups. I also had a Stage 2 TFS cam. The Cobra has less CFM 220 versus 245, and the EGR on the Cobra is a bottleneck. I am not saying that the Cobra isn't a good Intake, it is just that I had phenominal gains with it.
__________________
Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp |
![]() |
![]() |
![]() |
#9 |
dude5l
Join Date: May 2001
Location: Grande Prairie, Alberta, Canada
Posts: 603
|
![]() I would have to agree with Mach 1. What is wrong withe Cobra intake you have now? I don't think you will see a large H.P. gain by going to a street heat. I personally am going to get the Holley on this winter, but I will be running a more aggressive cam and supercharger.
__________________
Good luck! Brad R. 1992 L.X. 5.0 coupe MODS: A few little bolt ons ![]() New Best time ...11.60 @ 128 mph @ 2000+ ft altitude. Rice Haters Club member #39 Users rides #2542 |
![]() |
![]() |
![]() |
#10 | |
Registered Member
Join Date: May 1999
Location: SAN ANTONIO, TEXAS, USA
Posts: 611
|
![]() Quote:
I also think your cam has something to do with it, think about it, your cam was 'rated' up to about 6200-6500rpm (not sure). I think it will make more power with a slightly better flowing intake than the stge 1 cam would. I swapped my cam for the AFM one before I got the intake. I honestly did not go much faster (if at all), but I have to blame my valve springs more than the GT40 intake I had. With the intake swap, I ran the #s in my sig. Also I made that opinion on the Cobra cos I have heard time and time again on this very board that the GT40 does not make much more power than the Cobra and my 'guesstimated' comparism was with a GT40 unit. Oh yea, on the matter of tune, he did not have any change at all. No dyno, timing (15deg) or fuel (42psi) change at all. Disclaimer: I had clogged cats, and bad fuel filter, but those alone will not give me an increase of more than 5mph.
__________________
Black SN95 TFS heads, Holley intake, AFM B-2 cam, 12.9 @110mph best ET 13.06 @111mph best MPH After gutting out clogged cats and a much better tune. Took Nitrous out for warranty work ![]() Last edited by Kponti; 11-24-2001 at 11:59 AM.. |
|
![]() |
![]() |
![]() |
#11 |
RICE taste like Chicken
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
|
![]() Good points kponti....you know your stuff.
Nice times too, very nice mph.
__________________
Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp |
![]() |
![]() |
![]() |
#12 | |
Registered Member
Join Date: May 1999
Location: Georgia
Posts: 3,866
|
![]() Quote:
I disagree with your clog cats comment. Ive seen cars that would barely run with clogged cats, so this alone indeed could make a dramatic difference in performance. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Track conditions | Eric4Nitrous | Windsor Power | 12 | 11-22-2002 10:59 PM |
what size street slicks will fit on my 10 hole wheels? | Chevysucks | Windsor Power | 2 | 09-18-2002 02:16 PM |
i cant race at the track | untamed351 | Blue Oval Lounge | 5 | 07-23-2001 08:30 AM |
TFS Street Heat or Track Heat? | gt93mustang | Windsor Power | 7 | 01-27-2001 07:32 PM |
Performer RPM vs. Track Heat which is better for my setup? | MY91GT | Windsor Power | 0 | 01-19-2001 12:52 PM |