stripping paint from 93 cobra intake?
 

i want to strip the paint from the intake so i can polish it. i dont know what to use without pitting the aluminum? thanks for the help.

adam

Go to Walmart in the auto section and look for something called AirCraft Remover. It will melt the paint right off. May have to scrub a little if it doesnt take all of it off. Be carefull its acid and will burn skin.

Sandblasting will work great as well.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! <B