swap 95 computer for 89-93

[sn95gt19]

i have read in a tech article on this sight that the reason the 94-95 5.0L are so much slower is because of the way that the computer is calibrated to lower timing between shifts(to lower torque output), and the fuel curves, my question is, would i be able to just swap out the 94-95 computer and put in a 89-93 computer in it to delete this messed up programming that ford thought would be good. thanks

[Casper5.0]

You can swap the computers out but to do so you need the PIH kit from PRO-M. The PIH kit is pretty pricey i saw someone offering it for sale online for $500. I would just get a FRPP extender as it adjusts the fuel curve and takes out the timing retard between shifts. It also allows you to vary your rev limiter and adjust a/f ration. It's around $300. They've stopped production on the extender's i believe so you'll have to get one soon before everybody sells out.

RYAN

[sn95gt19]

OUCH!! that is a little pricey, for that much i might as well just either, keep the pedal mashed the floor during shifts, or buy an aftermarket computer thats programmable with a laptop, thanks for the input though, do you have any suggestions of which programmable computer to put in the car, thanks

[Casper5.0]

I have an EEC tuner. It takes a while to get used to the tuning part of it. Check it out at www.eec-tuner.com , they go through pretty much everything there is to tuning and you can order one there also. I believe mine was 380 with shipping and everything but i could be wrong. Just check it out. There's also the TWEECER i don't know anything about it, but it's supposed to be similiar to the eec tuner. Maybe someone else could give you some input on it. Hope this helps.

RYAN