MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Swap questions within (http://forums.mustangworks.com/showthread.php?t=2786)

Ricks86GT 04-29-2001 04:54 PM

Swap questions within
 
I was wondering if it's possibe to swap an 87 or later nose onto an 86 GT ? If so what other modifications would it require to make it work ? I realize head/foglights would have to be changed anything else though?

smokedchevy 04-30-2001 01:15 AM

It's definately possible. I don't know who to contact but people have done it. There are kits for it. Look through 5.0 magazine.

Unit 5302 04-30-2001 01:21 AM

The nose and hoods are different. I'm not sure about the fenders, but I believe they will fit.

Ricks86GT 04-30-2001 08:37 PM

Thanks guy's , anyone else have any opinions ?

82 GT 04-30-2001 10:33 PM

Unit5302, Are you sure the nose and hoods are different??? I am not positive about the noses but I am pretty sure the 86-93 hoods are the same.
I could be wrong though.


------------------
'82 GT 351W C-4,BBK headers,Carter 625 carb,Comp.Cam,Flowmaster exhaust.
1988 GT...T-5,bone stock

86GT 04-30-2001 11:30 PM

You'll need the nose and a hood from an 87-93 as they are different from the 86 and earlier cars. Other than that, its fairly straight forward. The fenders are the same too.

Ricks86GT 05-01-2001 09:43 AM

Does anyone know what other body parts are interchangeable doors, hatchback etc... ?

86GT 05-01-2001 07:16 PM

I've got a hatch off a 79 Capri on my 86 right now, so I know those will work, I'm pretty sure all the body panels will work too.

Ricks86GT 05-01-2001 08:04 PM

Thanks 86GT

95Convert 05-01-2001 08:35 PM

Just about everything will work. If you go to my homepage http://home.earthlink.net/~cbzfan

you can see my '86. I did all of the body change over work myself, however, to do it right, it is kinda steep. Since the side moldings are different, you'll have to replace those. On the positive side, if you put the front cap on, you'll get to drop the big metal bumber reinforcement at about 30 lbs. Drop me an email if you would like, and I'll answer any questions you might have.

Ricks86GT 05-01-2001 09:12 PM

95Convert I added your e-mail to my address book , and your site to my favorites. I'm sure I'll be in touch as I start this project. Thanks for all your help


All times are GMT -5. The time now is 01:24 PM.