© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-07-2001, 05:35 PM | #1 |
Registered Member
Join Date: Jul 2000
Location: Tampa, FL
Posts: 27
|
4.10's on the street...
I'm about to get in a set of 4.10's for my car and was wondering what to expect as far as street manners. I was going to go with 3.73's based on their popularity but found the 4.10's at a better price and was concerned as to the difference. Anyone out there who has 4.10's and could give me a little input would be much appreciated...especially if you've driven a 3.73 geared car at some point. Sorry, i know this has probably been asked a bunch in the past. Thanks in advance...Brian
------------------ Viper Red 85 GT ~ BBK longtubes and offroad h-pipe, Flowmaster 3-C, demon carb, edlebrock rpm intake, Eibach springs, KYB's, Steeda c/c plates & shifter, autometers, Saleen wing, Pony's, cowl hood, Alpine alarm, lots more to come... |
03-07-2001, 09:27 PM | #2 |
Registered Member
Join Date: Sep 2000
Location: Fresno,CA. USA
Posts: 384
|
Expect to turn about 3 grand at 75 MPH.
It's very streetable. And the benefits of kicking the crap out of everybody is well worth the 1 or 2 mpg you could lose. My car runs about .2 to .3 quicker than my buddies similar notch w/ 3.73's ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com |
03-07-2001, 11:13 PM | #3 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
im am so glad i got mine..i drive my car alot and i have no regreats..you know what is like to have you head snap back with just heads and intake in th gear
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch |
03-08-2001, 10:58 AM | #4 |
Registered Member
Join Date: Mar 1999
Location: Largo, FL USA
Posts: 274
|
If you have a manual tranny expect to be starting off in second as first gear is practically unuseable. Or so I hear, I still have 2.73's
------------------ 87 GT Full exhaust, K&N, KB Subs, BBK STB, homeade dumps... 87 Taurus New York Winters Bite! |
03-08-2001, 01:51 PM | #5 |
Registered Member
Join Date: Sep 1999
Location: Minneapolis, MN
Posts: 121
|
Excellent decision on the 4.10's-loved mine.
------------------ 1988 GT-under construction |
03-08-2001, 04:03 PM | #6 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
i allways start in first unless im rolling then ill leave it in 2nd..its not as bas as people who never used them think
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch |
03-08-2001, 04:32 PM | #7 |
Registered Member
Join Date: Jul 2000
Location: Tampa, FL
Posts: 27
|
Thanks a lot for all the response guys...makes me feel MUCH better about putting them in. Always heard the 3.73's for 5spds/4.10's for auto's rule of thumb but im glad all you who answered like the 4.10's. Can't wait to get them in the car now...thanks again.
------------------ Viper Red 85 GT ~ BBK longtubes and offroad h-pipe, Flowmaster 3-C, demon carb, edlebrock rpm intake, Eibach springs, KYB's, Steeda c/c plates & shifter, autometers, Saleen wing, Pony's, cowl hood, Alpine alarm, lots more to come... |
03-08-2001, 07:23 PM | #8 |
Registered Member
Join Date: Jan 2001
Location: okemos
Posts: 205
|
I just had mine put in and they are great. i use first gear all the time. i run about 2to 24 grand on highway. nice buy!
|
03-08-2001, 07:46 PM | #9 |
Registered Member
Join Date: Feb 2001
Location: Edmond, OK
Posts: 180
|
I'll run my 3.27's for a while and then I might consider 4.10's.
I just don't want to get 4.10's and then wish I had gotten 3.73's instead. Or get 3.73's and then wish I'd gotten 4.10's instead. |
03-08-2001, 08:13 PM | #10 |
Registered Member
Join Date: Aug 2000
Location: libertycenter,oh,us
Posts: 73
|
The way I look at it if u wanna race it and have some mods on the car 4.10's the only way to go.I changed to a c4 last fall and run 26 et streets,the thing tachs 3000-3200 at 60mph.I don't care about mpg it's my race car!I loved the gears with my 5 speed,cruise rpm was about 2200-2500,if u want 50mpg buy a honda(just kiddin about the honda)
------------------ 85 capri,balanced .030 over 79 302,windage tray polished/weight matched rods w/arp bolts.63 289 heads port/polish with FMS windsor springs. Torker 289 intake,514 solidcam,1.6rr.mac long tubes,off-road h,and pro dumps.T-5`4.10's on auburn HD carrier.NOS CHEATER kit,pullies and plenty more.Best NA run 1.683 60ft 7.837 @ 87 12.353 @ 109.05 NOS,11.21@ 116 1.49 60ft |
03-08-2001, 08:49 PM | #11 |
Registered Member
Join Date: Feb 2001
Location: Edmond, OK
Posts: 180
|
But won't cruising down the highway for 200+ miles at ~3000 rpm wear out the motor?
Cruising at 60mph @1000rpm is just like having the car sit there and idle. |
03-09-2001, 05:58 AM | #12 |
Registered Member
Join Date: May 1999
Location: Georgia
Posts: 3,866
|
No, it wont wear out the motor, that what they are supposed to do. Most 4 and 6 bangers turn 3000 rpm or more on the highway anyway.
You can go 60 mph at 1000 rpm? Wow, thats low. Are you sure? I would guess at least 1400 rpm or higher. I dont think i would compare cruising at low rpm to the same as idleing. Theres no laod on the motor at idle, although i guess the lower the rpms, the lower potential for wear, but I dont think it really would be hard on the engine cruising at 3K. Higher rpm wear occurs when you racing, and winding up to 500-6000 rpm. ------------------ 1993 GT/AOD '93 Mustang GT |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where to street race in Dallas/Fort Worth-Tx??? | keithclements | Stang Stories | 4 | 06-04-2010 02:56 PM |
Real Street race Sept 19th Holt, Florida | Jubi351 | Ford Show & Go | 0 | 09-06-2003 05:01 PM |
NEED ADVISE ON 4.10'S WITH STREET TIRES? | joey50gt | Windsor Power | 5 | 04-29-2001 10:58 PM |
Should I swap in 4.10's for my 3.73's- please read | Killercanary | Windsor Power | 15 | 03-27-2001 10:57 PM |
2000 Street Stock - the $15,000 question | Tim Miller | Racer's Club House | 4 | 10-20-1999 07:09 PM |