MustangWorks.com : Ford Forums - View Single Post

bigredstang · 01-25-2001, 09:07 AM

When I changed my tranny fliud this weekend I had all sorts of problems getting the right filter. The first filter was from Oreilly's for a 95 GT with an AODE supposedly. The pan gasket was square and the filter was shaped like a bananna. Needless to say that wasnt the right one. Well my pan was stamped "metric" and I had seen several AODs that had the stamp so I got a AOD filter. The pan gasket was correct, square but two corners were cut off, but the filter was wrong. I finally ended up with a filter for an AOT. Any one have any ideas what the deal is?

01-25-2001, 09:07 AM	#1
bigredstang Registered Member Join Date: Mar 2000 Location: lincoln, NE Posts: 80	Which Tranny in 95 GT? When I changed my tranny fliud this weekend I had all sorts of problems getting the right filter. The first filter was from Oreilly's for a 95 GT with an AODE supposedly. The pan gasket was square and the filter was shaped like a bananna. Needless to say that wasnt the right one. Well my pan was stamped "metric" and I had seen several AODs that had the stamp so I got a AOD filter. The pan gasket was correct, square but two corners were cut off, but the filter was wrong. I finally ended up with a filter for an AOT. Any one have any ideas what the deal is?