200 inline rebuild kits.

fordkid68 · 11-16-2002, 10:40 PM

hey every body. since I am going to be starting A 6 to 8 cyl swap soon I decided to rebuild my 200 and sell it. not looking to make any profit on it. I am in A mechine shop class so I figured I could learn on that engine and if I screw up it's not A big deal. so my question is does any body know where I can find A rebuild kit for A 200 cu inch inline engine. it's in A 66 stang if that matters at all.

thanks
ford kid

84LX89GT · 11-20-2002, 08:39 PM

You could basically go to any auto parts store and pick up a rebuild kit with all the name brands: Federal-Mogul, Clevite 77, etc. etc. and most places just sell the same stuff. It sounds like you're not too interested in building a screaming 200, so just about any mid-level rebuild kit would do, which most franchised parts stores have (Schuck's, Kragen, Checker, Al's, etc. etc.).
Good luck,

fordkid68 · 11-20-2002, 09:50 PM

hey thanks. I was just beginning to think no one was going to answer the question.

thanks again.
ford kid

11-16-2002, 10:40 PM	#1
fordkid68 Registered Member Join Date: Jan 2002 Location: fremont Posts: 306	200 inline rebuild kits. hey every body. since I am going to be starting A 6 to 8 cyl swap soon I decided to rebuild my 200 and sell it. not looking to make any profit on it. I am in A mechine shop class so I figured I could learn on that engine and if I screw up it's not A big deal. so my question is does any body know where I can find A rebuild kit for A 200 cu inch inline engine. it's in A 66 stang if that matters at all. thanks ford kid

11-20-2002, 08:39 PM	#2
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	You could basically go to any auto parts store and pick up a rebuild kit with all the name brands: Federal-Mogul, Clevite 77, etc. etc. and most places just sell the same stuff. It sounds like you're not too interested in building a screaming 200, so just about any mid-level rebuild kit would do, which most franchised parts stores have (Schuck's, Kragen, Checker, Al's, etc. etc.). Good luck, __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Generic Rebuild kits for Edelbrock 750 carb	SuperIrish	Windsor Power	3	05-10-2003 01:07 AM
T-5 Rebuild	95/GT/5.0	Windsor Power	9	12-26-2002 10:23 PM
Need good prices on engine rebuild kits	82 GT	Windsor Power	1	11-21-2002 02:03 AM
TRANS rebuild kits for 5spd	drtbiker	Windsor Power	3	08-18-2002 04:25 PM
advise on T-5 rebuild	429mustang	Blue Oval Lounge	0	07-23-2001 01:51 PM

11-20-2002, 09:50 PM	#3
fordkid68 Registered Member Join Date: Jan 2002 Location: fremont Posts: 306	hey thanks. I was just beginning to think no one was going to answer the question. thanks again. ford kid