Transmission Ratio Question? Help!

[MTU 50]

Does anyone know what the gear ratios are in the T-5 and the AOD? Any help would be appreciated. I am looking for the ratio's of each of the specific gears first through fifth and reverse (I.E. 2.5:1,0.68:1, etc.).

I am doing a design project in which I have to come up with the gear ratio's for a 4-speed transmission. The vehicle speed is from 0-100 and overdrive is needed for fuel economy. I realize the t-5 is a 5-speed and the AOD's overdrive acts as a fifth gear.

Also, if anyone has links to where I could get dyno figures for stock 302's it would be much appreciated. I figured I would ask you guys instead of rifling through five voulumes of MM & FF. I was assigned dyno specs for a 3412C Caterpillar marine engine, but the instructor said we could pick an alternate engine as long as we found dyno #'s and graphs so of course what better engine than the 302.

Thanks

------------------
1991 GT, AOD, Moroso Cold Air, 3.73s, Pulleys, 3-chamber(the left one fell off-NO time+No Money=College), FMS c-springs, and KYBs

[stng87]

all I know is that the 5th gear in the t5 can be taller than the OD gear in the aod. The t5 is like .68 and the aod is .67

------------------
1987 black with t-tops. Cobra intake, 1.7 cobra crane rollers, gt40p's, bbk shorties, off road h-pipe, adj. FPR, rebuilt aod w/shift kit, 65mm TB, 4.10's 12.90's at best probably less.
*** AOD's
Semper Fi

[MTU 50]

Yeah after I posted I found a bunch of websites with various gear ratios, so if you guys don't know off hand its not a problem.

BTW, Stng87 you are correct the t-5 is 0.68 and the AOD is 0.67. Thanks

------------------
1991 GT, AOD, Moroso Cold Air, 3.73s, Pulleys, 3-chamber(the left one fell off-NO time+No Money=College), FMS c-springs, and KYBs

[Capri306]

AOD's Ratios:

1st - 2.40:1
2nd - 1.47:1
3rd - 1.00:1 w/ 60% lockup
4th (OD) - 0.66:1 w/ 100% lockup

------------------
Capri306, Moderator, The Mustang Works Online
1979 Mercury Capri, 5.0L -- C4 -- 2.73
1987 Mustang LX Notch