Trick Flow Specialties good guys!
I have had my Twisted Wedge heads for at least 5 years. My Mustang is a trailer car and I don't have many miles but 5 years is a long time too. Several of my valve guides wore out. I know there was a problem with guides in these heads way back when but at the time I had no problem so I kept on running. I recently took my heads off and noticed several of the valves too loose to go back together. I call Trick Flow and talked to Charlie. Although my heads are this old he still sent me all new guides and even stem seals at no charge. I believe this says well of Trick Flow. Many thanks!
------------------ 88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg [This message has been edited by 8850 (edited 03-24-2001).] |
Good to hear! http://www.mustangworks.com/msgboard/smile.gif
I've had my TFS TW heads now for about 3 years (I think after the valve guide fix) with no problems whatsoever. Anyways, I had to call them up about a couple questions and to get the screws for the EGR stuff in the back of the heads and they were very helpful and knew their product very well - which is sometimes hard to come by these days. Take care, E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60' |
All times are GMT -5. The time now is 03:03 AM. |