door handles

HP400RW · 04-05-2003, 11:36 PM

does anyone know how to install new all metal door handles on a 93 gt? i dont know how to use the rivets i tried to find a rivet gun but none that hold that size. any help i need them on

thanks

eeh1025 · 04-06-2003, 07:04 AM

Hey there dont use a rivot use a 3/4 to and inch bolt to fit the hole and use a lock nut and it will never come off and you will be able to see that you used that. ive had mine on for about 6 years and it is still as tight as the day i put it on.
Ernie

04-05-2003, 11:36 PM	#1
HP400RW Registered Member Join Date: Jan 2003 Location: texas Posts: 46	door handles does anyone know how to install new all metal door handles on a 93 gt? i dont know how to use the rivets i tried to find a rivet gun but none that hold that size. any help i need them on thanks

04-06-2003, 07:04 AM	#2
eeh1025 Registered Member Join Date: Feb 2003 Location: NJ Posts: 81	Hey there dont use a rivot use a 3/4 to and inch bolt to fit the hole and use a lock nut and it will never come off and you will be able to see that you used that. ive had mine on for about 6 years and it is still as tight as the day i put it on. Ernie __________________ 93 GT 351 to 393 stroker, GT40 upper and lower intake, GT40X Turbo Swirl heads, holley 80mm throttle body, 255 fuel pump, 42 lb injector, JE pistons, Comp cam, comp lifters, comp pushrods, comp springs, crane Roller rockers. Trick flow Crank Shaft, comp Timing chain. MSD 7 series ignition, msd hvc2 coil, MSD timing adjust, MSD Pro billet Dis, Hooker long tube, Off road H pipe 1 chanber race flows, 4.10 gears, Vortech cooler and T-Trim with a 25lb boost AND LOTS MORE.