© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
07-23-2003, 03:23 PM | #1 |
Registered Member
Join Date: Jul 2000
Location: Norman, Oklahoma, USA
Posts: 597
|
Weld wheel fender space
Does anyone run the 15X8 welds with 5.5 backspace on a turbo coupe rear? If so, is there enough space to run some 10.5 inch slicks without rubbing? I'm going to roll my fender lip so I'll get a little extra space. I figure that the 10.5 inch slick will stick out about 1.25 inches from the rim and the rim will stick out about 2.5 inches from the hub flange, so that's 3.75 inches from the flange which if I measured right should be really close to fitting in the wheel well. Anyway, how much space is there with a stock axle? Also, do 15 inch rims clear the quad shock mount on the rear end? Cause as far as I can tell if I don't have quad shocks I could run a mega wide rim as long as it stuck way in instead of out. Anyway, Thanks guys.
__________________
Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What size weld wheel to get a 26x10 inch slick on an 84 hatch | ciara | Windsor Power | 3 | 09-23-2003 09:55 PM |
turn signal-maybe the whole harness-calling all electricians? | rwhite65 | Classic Mustangs | 6 | 07-25-2003 08:40 AM |
drag radial and weld wheel size? | 94cobra2 | Windsor Power | 4 | 08-20-2002 02:43 PM |
WELD WHEEL QUESTION on backspacing- your advice | Spenc2u | Windsor Power | 0 | 01-16-2002 03:23 PM |
88LX rolled fender lips, no quads, will 275/50R15's fit with a 7" wheel? | fiveohpatrol | Windsor Power | 10 | 07-27-2001 01:00 PM |