lobe, put the tfs 1 cam in the motor. its a nice cam for the juice and sounds good too. you didnt say what you have for rockers so i assume their stock. invest in a set of rollers. i would get 1.7 but dont mill the 40 off the heads. theres no need. if you do mill the heads you cant go with 1.7 rockers due to valve/piston clearance. dont wast the money on the heads either. try this setup- 1.7 rockers, tfs 1 cam, stock heads with light exhaust port work not milled, stock intake cut open and ported. along with what you have in you sig itll work great. been doing that one since 90. will put you in the 12s with good driving. oh, a 155 fuel pump and fuel press. reg too.
|