MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   what do I torque the upper intake down to with a 1" spacer? (http://forums.mustangworks.com/showthread.php?t=19817)

stanger8172 02-21-2002 07:00 PM
what do I torque the upper intake down to with a 1" spacer?
 
I just got a Trick Flow phenolic 1" spacer for the stock intake but it didn't come with any literature. What do I torque too now? Thanx

302 LX Eric 02-21-2002 10:35 PM
The same as stock. Which is 24 ft. lbs (First 12, then go to 24) for the lower intake and 12-18 lbs. for the bolts on the upper intake. Don't overtighten. Make sure you use the proper torque pattern.


E

stanger8172 02-21-2002 11:44 PM
Alright, thanx :)

LX XLR8R 02-22-2002 12:52 PM
top you can just do snug without a tourque wreanch..i never have use one on the upper intake 6 bolts..putting another 1" of runner space into a allready starving intake ehh?


All times are GMT -5. The time now is 05:16 PM.