What do you think?

bcinyuz · 04-17-2001, 05:30 AM

With these mods on my car what would be a quesstament on what I could achieve in th 1/4 mile.

BBK cold air induction
C&L MAM
BBK 65mm TB
Edlebrock Performer 5.0 intake
24# injectors
Dart Windsor Jr heads with roller tiped arms
4-row radiator for good cooling
Ford Motorsports High Flow water pump
Johnson Motorsports performance chip
5-speed manual with B&M ripper shifter
Ford Motorsports aluminum driveshaft
3.73 gears
drag radial
Heavy gague box steel tubing for sub-frame
welded on.
[AND I THINK THAT JUST ABOUT COVERS IT]

04-17-2001, 07:55 PM

It all depends on what type of driver you are. I'm sure you've heard it before, all the HP in the world won't do you any good if you can't get out of the box clean. If you sit at the line and spin 'em, you'll go as high as low 14's. If you get off nice and clean you'll get into the high 12's.

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside sub-connectors; K&N cone filter charger; Hurst shifter; fiberglass cowl hood; A/C-less; rear seat-less; cat-less; Flomasters; Corbeau racing seats (fronts);
30# injectors; 190 lb fp FPR; TFS Twisted Wedge Intake 12.513 @ 108 mph (Pre-inj/fuelpump/FPR/ intake)

2FastLX · 04-17-2001, 09:12 PM

Stock cam? I'd guess low to mid 13's with traction.

------------------
ICQ# 42269241
Indiana Stangers Association
Buy your parts here

[This message has been edited by 2FastLX (edited 04-17-2001).]

04-17-2001, 05:30 AM	#1
bcinyuz Registered Member Join Date: Aug 2000 Location: lodi,ca,usa Posts: 86	What do you think? With these mods on my car what would be a quesstament on what I could achieve in th 1/4 mile. BBK cold air induction C&L MAM BBK 65mm TB Edlebrock Performer 5.0 intake 24# injectors Dart Windsor Jr heads with roller tiped arms 4-row radiator for good cooling Ford Motorsports High Flow water pump Johnson Motorsports performance chip 5-speed manual with B&M ripper shifter Ford Motorsports aluminum driveshaft 3.73 gears drag radial Heavy gague box steel tubing for sub-frame welded on. [AND I THINK THAT JUST ABOUT COVERS IT]

04-17-2001, 07:55 PM	#2
1mintlx Guest Posts: n/a	It all depends on what type of driver you are. I'm sure you've heard it before, all the HP in the world won't do you any good if you can't get out of the box clean. If you sit at the line and spin 'em, you'll go as high as low 14's. If you get off nice and clean you'll get into the high 12's. ------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside sub-connectors; K&N cone filter charger; Hurst shifter; fiberglass cowl hood; A/C-less; rear seat-less; cat-less; Flomasters; Corbeau racing seats (fronts); 30# injectors; 190 lb fp FPR; TFS Twisted Wedge Intake 12.513 @ 108 mph (Pre-inj/fuelpump/FPR/ intake)

04-17-2001, 09:12 PM	#3
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Stock cam? I'd guess low to mid 13's with traction. ------------------ ICQ# 42269241 Indiana Stangers Association Buy your parts here [This message has been edited by 2FastLX (edited 04-17-2001).]