K&N Air Filter

Smokedawg · 03-16-2001, 10:08 PM

HEY,

I am looking for another conical air filter. My homeade ram air box was made for the 9inch. Does anyone know where I can get the best deal. I am running low on cash and am having to buy a new air filter and MAF!! Sux bad. What size MAF should I buy this time? Anyone heard of boring out the stock mass air unit?? Is it worth a shot?

------------------
347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

03-16-2001, 10:23 PM

I think you can pick up that filter for around $30. There usted to be a company that would bore out the stock maf but I don't know if they are still in business, it can be done. I've seen where a couple of people have mentioned a 73mm for $125, thats a good deal. I ran one on my blown stock engine for a couple years.. it worked fine.

------------------
Rick
My 89lx(updated 2/21/2001)
My 97 Cobra

Rick 91GT · 03-16-2001, 10:37 PM

Call BB&T racing they have good prices i\on K&N products. As for the Mass AIr if you want a 73mm contact gt93mustang he has a 73mm for sale, we both just upgraded to a 76mm C&L.

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

03-16-2001, 10:42 PM

I just happen to have a 30# tube I never got to use. I'd sell it to you for $10.

Smokedawg · 03-18-2001, 03:33 PM

thanks batson,
But I already had a extra 30#tube. Appreciate the help though. I had my stock bored fully. The walls on it are now paper thin. I didnt think the stock one could be opened up that much. I ordered the Filter out of jegs for like 31. 40 after tax. Thanks for all the help

------------------
347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

03-18-2001, 11:38 PM

Let me know how that thing runs with the maf bored out. If it doesn't run well I think I have my old one sitting around here somewhere.

They didn't charge you tax did they?? Ok you meant shipping, just screwing with ya.

jeb · 03-19-2001, 09:07 PM

I bored my stock one out to 60mm but I havn't timed it. It feels a little more responsive.

------------------
90LX Ragtop.
15.5@91 w/Aod
Strut tower brace, K&N, 2.25'' Flowmasters, Hollow cats, Crank pulley, Crane 2031, Crane rockers, Holley FPR, Heavy duty clutch, and alum quadrant.
Need Gears Bad!!!

03-16-2001, 10:08 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	K&N Air Filter HEY, I am looking for another conical air filter. My homeade ram air box was made for the 9inch. Does anyone know where I can get the best deal. I am running low on cash and am having to buy a new air filter and MAF!! Sux bad. What size MAF should I buy this time? Anyone heard of boring out the stock mass air unit?? Is it worth a shot? ------------------ 347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Filter Change	Jason1320	Modular Madness	4	02-23-2004 04:20 AM
K&N filter question...Possible disturbing news!!!!	Morgstang	Modular Madness	5	09-09-2003 03:28 PM
Fuel Filter ?	5.0PiMpin	Windsor Power	5	11-21-2001 03:30 PM
Finally got my 14 x 4" K&N filter.	Fox Body	Blue Oval Lounge	0	01-26-2001 04:10 PM

03-16-2001, 10:23 PM	#2
rbatson Guest Posts: n/a	I think you can pick up that filter for around $30. There usted to be a company that would bore out the stock maf but I don't know if they are still in business, it can be done. I've seen where a couple of people have mentioned a 73mm for $125, thats a good deal. I ran one on my blown stock engine for a couple years.. it worked fine. ------------------ Rick My 89lx(updated 2/21/2001) My 97 Cobra

03-16-2001, 10:37 PM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Call BB&T racing they have good prices i\on K&N products. As for the Mass AIr if you want a 73mm contact gt93mustang he has a 73mm for sale, we both just upgraded to a 76mm C&L. ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

03-16-2001, 10:42 PM	#4
rbatson Guest Posts: n/a	I just happen to have a 30# tube I never got to use. I'd sell it to you for $10.

03-18-2001, 03:33 PM	#5
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	thanks batson, But I already had a extra 30#tube. Appreciate the help though. I had my stock bored fully. The walls on it are now paper thin. I didnt think the stock one could be opened up that much. I ordered the Filter out of jegs for like 31. 40 after tax. Thanks for all the help ------------------ 347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

03-18-2001, 11:38 PM	#6
rbatson Guest Posts: n/a	Let me know how that thing runs with the maf bored out. If it doesn't run well I think I have my old one sitting around here somewhere. They didn't charge you tax did they?? Ok you meant shipping, just screwing with ya.

03-19-2001, 09:07 PM	#7
jeb Registered Member Join Date: Sep 1999 Location: Deltona Fl Posts: 140	I bored my stock one out to 60mm but I havn't timed it. It feels a little more responsive. ------------------ 90LX Ragtop. 15.5@91 w/Aod Strut tower brace, K&N, 2.25'' Flowmasters, Hollow cats, Crank pulley, Crane 2031, Crane rockers, Holley FPR, Heavy duty clutch, and alum quadrant. Need Gears Bad!!!