MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-28-2007, 11:32 PM   #1
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default What should this car run?

You guy's have helped me all along and I think I should be faster than the 8.61 @80.7 the only time I went to strip since tune, also first time on M/T ET Streets (26x10's) 60' times were off a bit compared to the old tall Mcreary's (1.94's from 1.86's). Spun every time in first gear. P.S.:3.73 gears, stock rear suspension, 3330 lbs
What do you suppose I should be in the 1/8th?
Thanks, may go back before tracks close.
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ

Last edited by skiwesser; 10-29-2007 at 07:00 AM..
skiwesser is offline   Reply With Quote
Old 10-31-2007, 10:44 PM   #2
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default Re: What should this car run?

C,mon Dark, USMC, Coupe, Wadda ya think?
Were's Jeff Chambers??
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 11-01-2007, 11:36 PM   #3
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: What should this car run?

you should be around 8.3 with 300hp at ur cars weight mabey ur not shifting at the right point
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Old 11-02-2007, 12:56 AM   #4
skiwesser
Registered Member
 
skiwesser's Avatar
 
Join Date: Sep 2000
Location: rock hill,S.C. 29730
Posts: 420
Default Re: What should this car run?

Only have the stock tach, I "try" to leave at 5000 and shift at 5400RPM's
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.

DYNO TUNED TO 300.97 RWHP 337RWTQ
skiwesser is offline   Reply With Quote
Old 11-02-2007, 06:18 PM   #5
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: What should this car run?

You should be in the 8.20's at a minimum. Put on some slicks, dump the clutch at about 5 grand, bang the gears at about 6 grand and it shouldnt be a problem.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 11-03-2007, 09:11 PM   #6
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: What should this car run?

8.60's @ 80mph in the 8th is around 13.40's @ 100 in the 1/4 right? With a 331, even low compression, heads, cam, intake, and gears, that car should be running high 12's at the worst. Somethings wrong IMO. Your right, you should be faster.
__________________
USMC302 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:23 PM.


SEARCH