cam lift question

redsn95vert · 04-28-2001, 09:00 PM

Does anyone know the stock Cam lift in the 5.0 HO....I just finished assemblig all new valve train in a set of GT40s and my valve springs are only good up to 500 lift, and I want to run 1.7 rockers.
Thanks

------------------
95 GT convertable, 3.73 gears, bbk off road h-pipe, march underdrive pullies, Saleen wires, custom made cold air induction,
Cobra intake w/ 65mm tb
GT40 heads, flowtech headers

8850 · 04-28-2001, 09:58 PM

Stock cam lift is .442. Stock rockers have a 1.59 ratio. With 1.70 ratio your lift will be .4726. You should be good to go.

------------------
88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg

[This message has been edited by 8850 (edited 04-28-2001).]

04-28-2001, 09:00 PM	#1
redsn95vert Registered Member Join Date: Jul 2000 Location: Rochester Posts: 323	cam lift question Does anyone know the stock Cam lift in the 5.0 HO....I just finished assemblig all new valve train in a set of GT40s and my valve springs are only good up to 500 lift, and I want to run 1.7 rockers. Thanks ------------------ 95 GT convertable, 3.73 gears, bbk off road h-pipe, march underdrive pullies, Saleen wires, custom made cold air induction, Cobra intake w/ 65mm tb GT40 heads, flowtech headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about SSM lift bars	skiwesser	Windsor Power	17	05-05-2004 06:40 PM
simple question	Lonzo	Classic Mustangs	3	09-10-2002 09:37 AM
Just found out I'm cam illiterate!	mysweetlx	Windsor Power	9	05-25-2002 05:22 PM
Edelbrock spec's and intake question??	jerryIII	Windsor Power	0	05-24-2001 12:49 PM

04-28-2001, 09:58 PM	#2
8850 Registered Member Join Date: Nov 1998 Location: Sugarland, TX USA Posts: 161	Stock cam lift is .442. Stock rockers have a 1.59 ratio. With 1.70 ratio your lift will be .4726. You should be good to go. ------------------ 88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg [This message has been edited by 8850 (edited 04-28-2001).]