what size street slicks will fit on my 10 hole wheels?

Chevysucks · 09-18-2002, 01:19 PM

has anyone ever had 10 or 10 1/2 inch street slicks on there ten hole wheels? do they fit good? I need a pair of good street slicks because I am going to the track in a month, and last time i went i had just regular street tires on it and i spun though 3 gears and chirped fourth. what are some good sticky street slicks that i could get for a not outrageous price?

Simi Stang · 09-18-2002, 02:35 PM

I've never tried a 10 inch slick or wider, but I run 26x8.5 Hoosier slicks on 15x7 turbine style GT wheels on my '90GT with no clearance or traction problems.

Ackbar00 · 09-18-2002, 03:16 PM

I just put 28*11.5 MT ET streets on 10 Holes the other day. No Problems with them so far(I wont race on them till Thursday). Have seen other people use this same setup and they said i would be fine.

09-18-2002, 01:19 PM	#1 (permalink)
Chevysucks Registered Member Join Date: Mar 2000 Location: Stroudsburg, PA, USA Posts: 150	what size street slicks will fit on my 10 hole wheels? has anyone ever had 10 or 10 1/2 inch street slicks on there ten hole wheels? do they fit good? I need a pair of good street slicks because I am going to the track in a month, and last time i went i had just regular street tires on it and i spun though 3 gears and chirped fourth. what are some good sticky street slicks that i could get for a not outrageous price? __________________ 88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears

09-18-2002, 02:35 PM	#2 (permalink)
Simi Stang Registered Member Join Date: Aug 2002 Location: Simi Valley, CA. Posts: 769	slicks I've never tried a 10 inch slick or wider, but I run 26x8.5 Hoosier slicks on 15x7 turbine style GT wheels on my '90GT with no clearance or traction problems. __________________ '90GT/ 306 w/ Edel. alum. hds. & performer manifold/ 24lb.inj./ B-303/ 1.72 rollers/ TRW frgd.pstns./ JBA hdrs./ MAC 2.5" off-road h-pipe w/ 2-chamber Flows/ Hurst short throw shftr./ Centerforce dual-friction clutch/ subframes/ reinforced torque boxes/ Crane HI-6 ignition/ Crane PS91 coil/ MSD timing retard for 150hp. NOS/ 3.73s/ Lakewood traction bars/ Auburn posi.... 1/4 mile times: on motor= 12.7 @ 108mph on nitrous= 11.6 @ 118mph

09-18-2002, 03:16 PM	#3 (permalink)
Ackbar00 Rebel Fleet Commander Join Date: Oct 2001 Location: Huber Heights, OH Posts: 1,003	I just put 28*11.5 MT ET streets on 10 Holes the other day. No Problems with them so far(I wont race on them till Thursday). Have seen other people use this same setup and they said i would be fine. __________________ 1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Slicks + Suspension = .6 off 1/4 mile....new track times	84LX89GT	Stang Stories	6	05-14-2003 09:59 AM
Weld Racing Wheels/ Street Wheels	jmjett01	Modular Madness	0	03-07-2003 11:45 AM
Can you lift the front wheels on street tires?	Agent_4573	Windsor Power	3	11-22-2002 09:40 PM
MT ET street slicks	801mustang	Windsor Power	4	08-29-2002 05:55 PM
MT ET street slicks	801mustang	Stang Stories	6	08-29-2002 02:57 PM

Sponsored Links