
                    © Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
                    
                  
                MustangWorks.com is designed and hosted by Aero3 Media.
| 		
			
			 | 
		#1 | 
| 
			
			
			
			 Registered Member 
			
			
		
			
				
			
			
			Join Date: Mar 2002 
				Location: Lakewood, Wa 
				
				
					Posts: 161
				 
				
				
				
				 | 
	
	
	
		
		
			
			 Scott- leave the PCV valve in the lower intake. Leave a few inches of hose coming off the PCV valve. Go run down to your local auto parts store and pick up a breather that will fit into the hose coming off your PCV valve (there's like a ton of different looking ones, I got one that pushes into the hose and has some fiber element in the end of it, cost like 2 bucks). But yes, block off all the other nipples. Then put a breather on the passenger valve cover. I went a step ahead and drilled a hole into the driver's side valve cover, then JB-welded a 1/2 inch thick by 4 inches tall pipe (found in plumbing dept at Home Depot) on there and ran a vacume line from that pipe to the nipple on the passenger side valve cover. 
		
	
		
		
		
		
		
		
			Is it workable? 
				__________________ 
		
		
		
		
		
		
	
	'77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro  | 
| 
		 | 
	
	
	
		
		
		
		
			 
		
		
		
		
		
		
			
		
		
		
	 | 
		
  | 
	
		
  | 
			 
			Similar Threads
		 | 
	||||
| Thread | Thread Starter | Forum | Replies | Last Post | 
| Convertible Sound System | ChunkFunky | Windsor Power | 9 | 07-10-2002 02:19 PM | 
| Convertable Sound System | ChunkFunky | Windsor Power | 11 | 06-14-2002 06:45 AM | 
| 2001 GT Mach 460 sound system | natx808 | Audio, Security, & Electronics | 6 | 01-10-2002 07:18 PM | 
| does anyone have any mach 460 sound system parts? | 95 King GT | Windsor Power | 0 | 09-13-2001 01:33 AM | 
| Alternator/Volt levels with high powered sound system | skadonya | Audio, Security, & Electronics | 1 | 08-21-2001 12:23 PM | 
                    
                  