whats good?

87GT50 · 05-11-2003, 08:46 PM

Hey, I just recently bought an 87 Mustang GT, 5.0, 5 speed, it has 3.55 gears, march ram air and underdrive pulleys, and an exhaust from the manifolds back. What kind of quarter time should I expect to run? Also, what will it take to get deep into the 13's? thanks for any help, im new to the fox bodies.

red82gt · 05-12-2003, 02:01 AM

It depends on how it runs now. There's the odd stocker that is 13's capable from the factory but they're not as common as some will have you believe. You can get deep 13's by many different routes, just depends on how much you want to spend or how many sacrifices you are willing to make. Power adder? N/A (intake, heads, cam), extreme diet and suspension or a combination of these will get you there. So first off, what do you want out of the car and how fast do you eventually want to go?

87GT50 · 05-12-2003, 08:17 AM

Well, I'm in high school so I need a combo that is still daily driveable. In the end, I'm shooting for high 12's that can be driven daily and to the track and back. I may just go with some bolt ons and a novi if i can find one cheap enough.

tmoss · 05-12-2003, 08:39 AM

You have gears which is good. The stock lower intake is the biggest restriction in the stock upper/lower intake. I have customers running high 12s and low 13s on my ported stock lower. A Cobra family intake (GT40, Cobra, Explorer) or a Performer are good choices too. I charge $100 for porting + about $30 round trip shipping.

87GT50 · 05-13-2003, 08:08 AM

Is the trick flow intake any good? Im thinking about buying that one.

tmoss · 05-13-2003, 08:19 AM

Trick Flow Street Heat is a good intake too.

87GT50 · 05-13-2003, 10:49 AM

Well, I think the first thing I'm going to do is buy subframe connectors and a shifter. Who makes the best sfc's and short throw? and how much is it to get sfc's installed? thanks

red82gt · 05-16-2003, 02:32 AM

Both those mods are good steps. Get the subframes welded in, I found someone that did it for $40 Canadan.
I also like my B&M ripper, there are other good choices too.

05-11-2003, 08:46 PM	#1 (permalink)
87GT50 Registered Member Join Date: May 2003 Location: Appleton, Wisconsin Posts: 4	whats good? Hey, I just recently bought an 87 Mustang GT, 5.0, 5 speed, it has 3.55 gears, march ram air and underdrive pulleys, and an exhaust from the manifolds back. What kind of quarter time should I expect to run? Also, what will it take to get deep into the 13's? thanks for any help, im new to the fox bodies.

05-12-2003, 02:01 AM	#2 (permalink)
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,508	It depends on how it runs now. There's the odd stocker that is 13's capable from the factory but they're not as common as some will have you believe. You can get deep 13's by many different routes, just depends on how much you want to spend or how many sacrifices you are willing to make. Power adder? N/A (intake, heads, cam), extreme diet and suspension or a combination of these will get you there. So first off, what do you want out of the car and how fast do you eventually want to go? __________________ F4TE 351w block 393 stroker: Scat 3.85" crank, scat H beams, Probe SRS pistons, Proformed 750 DP holley, Vic jr intake, AFR 205's, Buddy Rawls hydraulic roller cam, Crane 1.6 Gold race rockers, Powerforce SFI balancer, centerforce steel flywheel. Kooks 1 3/4" headers, Spec stage III clutch, Dr. Gas 3" x-pipe, spintech pro streets, TKO-600, Moser 31 splines, Detroit Locker. Just about back on the road...

05-12-2003, 08:39 AM	#4 (permalink)
tmoss Registered Member Join Date: Mar 2003 Location: Saint Louis, MO Posts: 632	You have gears which is good. The stock lower intake is the biggest restriction in the stock upper/lower intake. I have customers running high 12s and low 13s on my ported stock lower. A Cobra family intake (GT40, Cobra, Explorer) or a Performer are good choices too. I charge $100 for porting + about $30 round trip shipping. __________________ Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/

05-13-2003, 08:19 AM	#6 (permalink)
tmoss Registered Member Join Date: Mar 2003 Location: Saint Louis, MO Posts: 632	Trick Flow Street Heat is a good intake too. __________________ Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/

05-16-2003, 02:32 AM	#8 (permalink)
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,508	Both those mods are good steps. Get the subframes welded in, I found someone that did it for $40 Canadan. I also like my B&M ripper, there are other good choices too. __________________ F4TE 351w block 393 stroker: Scat 3.85" crank, scat H beams, Probe SRS pistons, Proformed 750 DP holley, Vic jr intake, AFR 205's, Buddy Rawls hydraulic roller cam, Crane 1.6 Gold race rockers, Powerforce SFI balancer, centerforce steel flywheel. Kooks 1 3/4" headers, Spec stage III clutch, Dr. Gas 3" x-pipe, spintech pro streets, TKO-600, Moser 31 splines, Detroit Locker. Just about back on the road...

05-12-2003, 08:17 AM	#3 (permalink)
87GT50 Registered Member Join Date: May 2003 Location: Appleton, Wisconsin Posts: 4	Well, I'm in high school so I need a combo that is still daily driveable. In the end, I'm shooting for high 12's that can be driven daily and to the track and back. I may just go with some bolt ons and a novi if i can find one cheap enough.

05-13-2003, 08:08 AM	#5 (permalink)
87GT50 Registered Member Join Date: May 2003 Location: Appleton, Wisconsin Posts: 4	Is the trick flow intake any good? Im thinking about buying that one.

05-13-2003, 10:49 AM	#7 (permalink)
87GT50 Registered Member Join Date: May 2003 Location: Appleton, Wisconsin Posts: 4	Well, I think the first thing I'm going to do is buy subframe connectors and a shifter. Who makes the best sfc's and short throw? and how much is it to get sfc's installed? thanks

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lynyrd Skynyrd	mustang2002	Blue Oval Lounge	48	07-05-2002 09:44 PM
Good Car Movies?	1969Mach1	Blue Oval Lounge	22	05-21-2002 09:56 AM
Track Last Night!! (Good and Terrible)	CobraConv99	Stang Stories	6	11-09-2001 12:59 AM
Good race with a new V6 stang...	Skyman	Stang Stories	6	01-01-2001 06:06 PM

Sponsored Links