please help identify this TB

avbcon12 · 01-24-2002, 09:00 PM

ill get a picture as soon as possible. i just bought a 65mm TB and it doesnt have the inlet pipe (90 degree elbow on TB) for the vent that comes off the oil filler cap. what should i do? can i drill a hole for one?

http://www.geocities.com/vinnysantos2001/MustangTB.txt

thanks
adam

avbcon12 · 01-26-2002, 05:02 PM

is this that odd that nobody has seen it?

just tell me what i should do???

thanks,
adam

Stang Runner · 01-26-2002, 11:32 PM

I think that is the line that goes to the Valve cover it is not a mustang one. get a Van line and fid another place to put it on the Intake pipe or some thing I Hop you get the Parts Cheap It is going to be a odd set up.
look at this pic of mine you can see where it goes.

01-24-2002, 09:00 PM	#1
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	please help identify this TB ill get a picture as soon as possible. i just bought a 65mm TB and it doesnt have the inlet pipe (90 degree elbow on TB) for the vent that comes off the oil filler cap. what should i do? can i drill a hole for one? http://www.geocities.com/vinnysantos2001/MustangTB.txt thanks adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com Last edited by avbcon12; 01-24-2002 at 09:47 PM..

01-26-2002, 05:02 PM	#2
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	is this that odd that nobody has seen it? just tell me what i should do??? thanks, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

01-26-2002, 11:32 PM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	I think that is the line that goes to the Valve cover it is not a mustang one. get a Van line and fid another place to put it on the Intake pipe or some thing I Hop you get the Parts Cheap It is going to be a odd set up. look at this pic of mine you can see where it goes. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need help to identify a T5	cucho	Windsor Power	2	11-30-2003 11:33 AM
Help me identify part number	RobertD	Windsor Power	0	10-14-2001 09:49 PM
how to identify mexican block?	blue oval 50h	Windsor Power	6	10-09-2001 12:38 PM
How to identify a Pro 5.0..	D&R Stang	Windsor Power	1	09-05-2001 04:05 PM
How do I identify a(n) (aftermarket) cam?	Gautam	Windsor Power	13	04-14-2001 09:32 PM