Where is the block's part # is stamped at???

JRowlette · 06-03-2001, 06:44 PM

Does anybody know where the factory stamp on the block is located that tells what kind of block it is and all of that stuff??

95Convert · 06-04-2001, 12:10 AM

It is cast into the bottom of the block, in the back, either the right or left side(I forget)

Stang_ROTY · 06-04-2001, 12:32 PM

I got a '69 351W and the part number is stamped on the bottom.

------------------
Almost done!
93 GT, Dynamic C4, 8 pt cage, chute,
Sothside Machine bars & Sub-frames, 3.73's
'69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers Comp Cam..BBK 70MM TB, ceraminc shorties & H-pipe w/cats..30lb Injectors..Cartech Fuel System

06-04-2001, 10:29 PM

Stang_ROTY---Where exactly at on the bottom? I have a 69 Mustang but my car had a 302 2-bbl originally so I need to find out what year my engine is. I think it's either a 69 or 70. 69 was the best year for the windsor, wasn't it?

------------------
'69 Coupe with 351W
=========================
Edelbrock RPM intake, Edelbrock RPM cam, Edelbrock 750 cfm carb, Edelbrock lifters, Edelbrock double roller timing chain, Edelbrock valve springs, Accel coil, Moroso Blue-Max wires, Hedman headers, 2 1/2" pipe, glasspacks, Flex fan, Lakewood traction bars, C4, 3:1 gears, 290hp-stock heads
=========================
The Surgeon General didn't say anything about smoking your azz!!

06-03-2001, 06:44 PM	#1 (permalink)
JRowlette Registered Member Join Date: Apr 2001 Location: Bowling Green, KY Posts: 95	Where is the block's part # is stamped at??? Does anybody know where the factory stamp on the block is located that tells what kind of block it is and all of that stuff??

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TFI module part #	GhettoPop	Windsor Power	2	02-12-2004 01:34 PM
Looking for Bosch part #'s!	chris91LX	Windsor Power	0	12-28-2001 06:58 PM
Need help finding Ford part numbers	Capri306	Windsor Power	0	03-30-2001 10:13 AM
Aftermarket 4.6 Heads & Manifolds & Blocks...WHERE ARE THEY!! got any ideas?	Shawn	Modular Madness	3	09-26-2000 03:07 PM
Hard to locate part for 83 stang help!!!	83stanger	Small Ponies	0	03-02-1999 08:52 AM

06-04-2001, 12:10 AM	#2 (permalink)
95Convert Registered Member Join Date: Oct 1999 Location: Murfreesboro, TN Posts: 123	It is cast into the bottom of the block, in the back, either the right or left side(I forget)

06-04-2001, 12:32 PM	#3 (permalink)
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 734	I got a '69 351W and the part number is stamped on the bottom. ------------------ Almost done! 93 GT, Dynamic C4, 8 pt cage, chute, Sothside Machine bars & Sub-frames, 3.73's '69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers Comp Cam..BBK 70MM TB, ceraminc shorties & H-pipe w/cats..30lb Injectors..Cartech Fuel System

06-04-2001, 10:29 PM	#4 (permalink)
BennyBoy Posts: n/a	Stang_ROTY---Where exactly at on the bottom? I have a 69 Mustang but my car had a 302 2-bbl originally so I need to find out what year my engine is. I think it's either a 69 or 70. 69 was the best year for the windsor, wasn't it? ------------------ '69 Coupe with 351W ========================= Edelbrock RPM intake, Edelbrock RPM cam, Edelbrock 750 cfm carb, Edelbrock lifters, Edelbrock double roller timing chain, Edelbrock valve springs, Accel coil, Moroso Blue-Max wires, Hedman headers, 2 1/2" pipe, glasspacks, Flex fan, Lakewood traction bars, C4, 3:1 gears, 290hp-stock heads ========================= The Surgeon General didn't say anything about smoking your azz!!

Sponsored Links