center caps for turbines?

Hethj7 · 12-25-2000, 09:34 PM

I need a new one. Where is the best place to get them? There is a place back home where I can get used ones for like 18 bucks. That may be my best deal, but I though I would just check.

84_GT350 · 12-26-2000, 01:54 AM

Doesn't Dugans sell them? Probably not $18 each, but it's a place to get them.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

AxemanZZ · 12-26-2000, 01:54 AM

I may have a friend who has a couple. Let me talk to him tomorrow and I'll see. I know I saw a couple hanging on his wall, and he doesn't have turbines on his car now, so maybe he'll sell them.

------------------
90 Mustang LX 5.0
My Ride*My Site

Hethj7 · 12-26-2000, 11:56 AM

Thanks. Just let me know what you find out.

cleanLX · 12-28-2000, 10:45 PM

i have a couple in pretty darn good shape if you want them. i only use my turbines at the track and you cannot run center caps. like i say, you can have them, tell me how to mail them at no cost to me and they're on thier way...

------------------
'92 emerald coupe, no air silencer, bored stock MAF to 60mm, sub-frames welded, strut tower brace, 180 thermo, 16 deg's, K'n'N panel, bosh platniums, u.d. pullies, off road h-pipe, hurst "stir stick", fms 3.73's. otherwise, factory original.
best 1/4 = 13.264@ 100.89mph with a 1.824 60 ft. on turbines with 235/60-R15 BFG DR's

[This message has been edited by cleanLX (edited 12-28-2000).]

Hethj7 · 12-29-2000, 12:32 AM

Great, but I would like to give you something for them. Let me know how much and then I will mail you a check with that plus some extra for shipping costs. Send me an email with the info.

cleanLX · 12-29-2000, 02:37 PM

Well, If you must give me something, send me I picture of your car once you get the cap on it.
I’m in Phoenix Arizona, whewph, just got back in from the shed, had to make double sure I actually brought them with me.
So I’m staring at them, one has a little hairline crack on it, just at the outside edge, the other looks pretty darn good. Well, both are dirty.
Reply with your mailing address, I’ll pack ‘em up over the weekend and send them USPS. I’ll let you know the shipping; send me a check for that would be nice.

I'm fire'n this off to you aol as well, we can hook up mailing address' there.

Hethj7 · 01-07-2001, 09:28 PM

Sorry it has taken me a while to reply. I never saw your email on aol. I probably deleted it thinking it was junk mail since I didn't recognize the name. If you could, send me your email address at Hethj7@aol.com and I will get you a mailing address and get a check in the mail for you. Thanks again!

cleanLX · 01-09-2001, 01:06 AM

done, just do not delete this one LOL...

12-25-2000, 09:34 PM	#1
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	center caps for turbines? I need a new one. Where is the best place to get them? There is a place back home where I can get used ones for like 18 bucks. That may be my best deal, but I though I would just check.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are these Center Caps Interchangeable ???	Katmandu	Appearance & Detailing	2	02-04-2008 03:34 PM
Where can I get center caps for "polished" ponies?	Fox Hound	Windsor Power	0	11-12-2002 12:03 PM
95 Cobra R Wheel Center Caps	timbo3282	Modular Madness	0	08-29-2001 03:25 PM
95 Cobra R Wheel Center Caps	timbo3282	Special Production	0	08-29-2001 03:20 PM
68-69 center caps 4	greenmonster	Classic Mustangs	0	10-25-1999 07:36 PM

12-26-2000, 01:54 AM	#2
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Doesn't Dugans sell them? Probably not $18 each, but it's a place to get them. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

12-26-2000, 01:54 AM	#3
AxemanZZ Registered Member Join Date: Mar 2000 Location: Indiana Posts: 984	I may have a friend who has a couple. Let me talk to him tomorrow and I'll see. I know I saw a couple hanging on his wall, and he doesn't have turbines on his car now, so maybe he'll sell them. ------------------ 90 Mustang LX 5.0 My Ride*My Site

12-26-2000, 11:56 AM	#4
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Thanks. Just let me know what you find out.

12-28-2000, 10:45 PM	#5
cleanLX Registered Member Join Date: Aug 2000 Location: Phoenix Az. by way of fredericton, NB Canada Posts: 73	i have a couple in pretty darn good shape if you want them. i only use my turbines at the track and you cannot run center caps. like i say, you can have them, tell me how to mail them at no cost to me and they're on thier way... ------------------ '92 emerald coupe, no air silencer, bored stock MAF to 60mm, sub-frames welded, strut tower brace, 180 thermo, 16 deg's, K'n'N panel, bosh platniums, u.d. pullies, off road h-pipe, hurst "stir stick", fms 3.73's. otherwise, factory original. best 1/4 = 13.264@ 100.89mph with a 1.824 60 ft. on turbines with 235/60-R15 BFG DR's [This message has been edited by cleanLX (edited 12-28-2000).]

12-29-2000, 12:32 AM	#6
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Great, but I would like to give you something for them. Let me know how much and then I will mail you a check with that plus some extra for shipping costs. Send me an email with the info.

12-29-2000, 02:37 PM	#7
cleanLX Registered Member Join Date: Aug 2000 Location: Phoenix Az. by way of fredericton, NB Canada Posts: 73	Well, If you must give me something, send me I picture of your car once you get the cap on it. I’m in Phoenix Arizona, whewph, just got back in from the shed, had to make double sure I actually brought them with me. So I’m staring at them, one has a little hairline crack on it, just at the outside edge, the other looks pretty darn good. Well, both are dirty. Reply with your mailing address, I’ll pack ‘em up over the weekend and send them USPS. I’ll let you know the shipping; send me a check for that would be nice. I'm fire'n this off to you aol as well, we can hook up mailing address' there.

01-07-2001, 09:28 PM	#8
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Sorry it has taken me a while to reply. I never saw your email on aol. I probably deleted it thinking it was junk mail since I didn't recognize the name. If you could, send me your email address at Hethj7@aol.com and I will get you a mailing address and get a check in the mail for you. Thanks again!

01-09-2001, 01:06 AM	#9
cleanLX Registered Member Join Date: Aug 2000 Location: Phoenix Az. by way of fredericton, NB Canada Posts: 73	done, just do not delete this one LOL...