MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Where is the knock sensor at? (http://forums.mustangworks.com/showthread.php?t=3048)

88GT5.013.02 05-12-2001 07:40 PM

Where is the knock sensor at?
 
Where is the knock sensor located, is there even one at all? Also can anyone tell me why you make more horsepower with 87 octane? I tried to run my car with 87 on an 80* day (with cast iron heads and 14* of timing) and it didn't knock or ping (plugs were fine too), but it felt way slower. I put 93 back in and it ran much better.

------------------
88GT stock shortblock, GT-40 iron heads, Edlebrock Performer intake, 24# inj, Pro-M 75mm Bullet MAM, 3.73, hurst short throw, F-303, electric fan, alum rad, FMS HD clutch, R134a ac conversion, 70mm TB , and some other stuff I probably forgot, 13.02@106 with a 1.87 60ft

red82gt 05-12-2001 10:41 PM

There is no knock sensor, sometimes you can't hear detonation but it is still there, I was going to suggest that you might be a touch rich but if the plugs were fine then, hmm. I guess some scientific research is in order...

------------------
GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B+M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

88GT5.013.02 05-13-2001 11:45 AM

Cool I didn't think there was a knock sensor. It is wierd that my car ran that poor on 87 octane. I heard that running 87 octane is supposed to make more power.

I know one possibility is that my timing light could be inaccurate also. I set the timing on a friends car and another guy checked the timing and said it was 8* off. So I should look into that first.

Thanks,

Jason

91evilstang 05-14-2001 03:21 AM

Remember to pull the spout connector when setting base timing http://www.mustangworks.com/msgboard/smile.gif

------------------
91GT Flowmaster 2 chambers,off road H pipe,mac equalength headers,F303 cam,high lift valve springs ,svo 1.6 roller rockers,14*timing,410's,BBK cold air kit,hurst shifter.Ran 13.5@101 with stock headers and air box.

88GT5.013.02 05-14-2001 01:51 PM

Yeah I know to do that, I just think that my timing light is on its way south. Maybe it was dropped too many times.


All times are GMT -5. The time now is 07:23 PM.