MustangWorks.com : Ford Forums - View Single Post

chadtn2 · 01-24-2002, 05:32 PM

You don't have to take anything off to get to it. You just have to reach back behind the intake and pull it out.

That picture is on a Holley intake...But you can see the hole that it will plug into. That is on the firewall side of the engine. You just have to reach back behind the upper intake and yank it out...should have a large hose coming out of that hole and the PCV valve is attached. It sits in a little rubber grommet. (spelling?)

Chad

01-24-2002, 05:32 PM	#5
chadtn2 Registered Member Join Date: May 2001 Location: Chattanooga, TN USA Posts: 29	You don't have to take anything off to get to it. You just have to reach back behind the intake and pull it out. That picture is on a Holley intake...But you can see the hole that it will plug into. That is on the firewall side of the engine. You just have to reach back behind the upper intake and yank it out...should have a large hose coming out of that hole and the PCV valve is attached. It sits in a little rubber grommet. (spelling?) Chad __________________ 78 Regal (stock) 89 Mustang GT 25th Anniversary (parts purchased, but not installed) 93 Mustang LX 5.0 ex-FHP car (modified) 02 Camaro Z28 35th Anniversary (light mods) http://members.aol.com/chadtn