Lowering springs are not a good choice for drag racing, as they do not allow front to rear weight transfer. If you want to keep those springs, you may consider adjustable shocks & struts, that can be turned down at the strip to allow more weight transfer. Also, at the dragstrip, you could loosen the front sway bar. That would allow some transfer of weight.
As for the Drag Radials, BFGoodrich says they only need a slight burnout, but they seem to work better when I do a long burnout and get them hot. I drive on the street with 28-30psi in them, then drop them to around 12-15psi at the track.
------------------
Moxie Racing
The Nitrous Oxide Information Site