will it clear?

mustangtim · 08-15-2001, 10:31 AM

I've got heads with 1.94"/1.60" valves milled to 60cc with 1.6 rockers. I want to put a B cam in it and I am wondering if I am going to have any clearance problems. Any help would be appreciated.

Thanks

BlackFly · 08-15-2001, 11:21 PM

if its all apart, check it the usual way , with the heads on(not torqued down) use the stock cam and clay the pistons, check for how much clearance and add the difference, which should be about .036. you want .100 clearance. based on your specs, there shouldnt be a problem with that cam.

mustangtim · 08-16-2001, 06:34 AM

Nothing's apart but I've got all the goods. Thanks for your help.

08-15-2001, 10:31 AM	#1
mustangtim Registered Member Join Date: Jul 2001 Location: Houston Posts: 10	will it clear? I've got heads with 1.94"/1.60" valves milled to 60cc with 1.6 rockers. I want to put a B cam in it and I am wondering if I am going to have any clearance problems. Any help would be appreciated. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clear tail marker lights	5P0INT0	Windsor Power	7	09-10-2003 06:53 PM
clear lamps ???	GhettoPop	Windsor Power	1	07-24-2003 08:50 PM
clear valve covers	Mach 1	Windsor Power	11	03-09-2002 01:36 AM

08-15-2001, 11:21 PM	#2
BlackFly Registered Member Join Date: Feb 2001 Location: winnipeg , manitoba , canada Posts: 83	if its all apart, check it the usual way , with the heads on(not torqued down) use the stock cam and clay the pistons, check for how much clearance and add the difference, which should be about .036. you want .100 clearance. based on your specs, there shouldnt be a problem with that cam.

08-16-2001, 06:34 AM	#3
mustangtim Registered Member Join Date: Jul 2001 Location: Houston Posts: 10	Nothing's apart but I've got all the goods. Thanks for your help.