Will a Edelbrock Performer RPM and a Holley fit under the stock hood
 

Will a Elelbrock performer RPM intake and a Holley four-barrel fit under my stock hood if I use a drop base air cleaner?

Hey man I

Hey man Im pretty sure it will fit, my buddy down here had either the performer or the performer rpm on his car with a 650 holley and it fit fine, you might want to get the covertible motor mounts, they drop the motor down a little lower that stock, so you can run a regular air cleaner. Good Luck, John

i know its not exactly the set up you have but i have a wiend intake, holly carb and a 1 inch spacer inbetween, 2 inch high ford motorsport air filter,with the stock hood, and im pretty sure stock motor mounts. i dont know if that helps any

Yes it will fit, I ran that same thing under the stock hood for a while and had plenty of hood clearance.

if it doesn't fit cut a big hole around the carb and get one of those scoops out of Summit that have the 3 red butterfly flaps that hook up to your throttle. But keep it out of the rain...:D :p

Edlebrock RPM, holley 600 cfm, 3X14" K/N, stock mounts. No problems here.

Could mabey get away with 1" spacer(Maybe not).