wiring the duraspark II in a 89 GT

Ieatcamaros · 04-13-2003, 08:17 PM

I am fixin to swap the 302 to a 351 and swap to carb at the same time. I have read Fletch's carb'd mustang site a hundred times. http://www.jason.fletcher.net/tech/e...b/efi-carb.htm Does anyone here know exactly which wire is what on the black and grey connectors by the brake booster? I got the ignition module with the blue connectors where the wire meets the module. I am going to try to do this in a weekend (next weekend) and I was hoping that someone could just tell me which wire goes where to save me some time.

Ieatcamaros · 04-14-2003, 03:53 PM

no one?

Ieatcamaros · 04-15-2003, 06:30 AM

tmoss · 04-15-2003, 12:19 PM

I don't know if this will help or not, but here it is...............

Ieatcamaros · 04-15-2003, 04:06 PM

I have some schematics on the duraspark II ignition system. But I am glad you posted that, cause I like it better than the ones I have. What I need to know is what wires are what on the mustang (the ones that lead into the plugs by the brake booster). If anyone on this forum knows, please post it. tmoss, I appreciate your help.

Sicy Stang · 04-15-2003, 04:54 PM

I just wanted to say that your username actually made me laugh out loud.

Ieatcamaros · 04-15-2003, 09:50 PM

Well, I am glad somebody thought it was funny. I actually got that idea from an old four wheeler sticker my buddy had. It said "This bike eats hondas and shits suzukis". Sig goes along with the username, obviously. I thought it was pretty creative. And when I get my 351 put in, I will have that sticker made and put on. I hate chevys so damn much, especially the slomaro. Vettes used to piss me off until I realized that everyone driving them is 50 years old.

I saw some dude on a ricer forum that probably had been here before. His username was ieatnissans. Must have been a honda man. Imagine that. Damn ricers.

tmoss · 04-16-2003, 07:14 AM

Quote:

Originally posted by Ieatcamaros
Well, I am glad somebody thought it was funny. I actually got that idea from an old four wheeler sticker my buddy had. It said "This bike eats hondas and shits suzukis". Sig goes along with the username, obviously. I thought it was pretty creative. And when I get my 351 put in, I will have that sticker made and put on. I hate chevys so damn much, especially the slomaro. Vettes used to piss me off until I realized that everyone driving them is 50 years old.

I saw some dude on a ricer forum that probably had been here before. His username was ieatnissans. Must have been a honda man. Imagine that. Damn ricers.

I have a suggestion - change the "Firebird" to "Fireturd".

And watch out! some of us 50+ guys might smoke your a** on the street some day.

Ieatcamaros · 04-16-2003, 04:01 PM

Hey tmoss, you don't have a vette do you? Just kidding man. Most of the 50+ guys and gals in vettes aren't interested in racing. At least not around here. Hell, some of them don't even drive the ***damn speed limit. I have gotten some old guy in a powerstroke 3/4 ton to race me before. Fireturd is a good idea, I will remember that. Thanks for the suggestion.

tmoss · 04-16-2003, 05:25 PM

No, no vette. The car before my 88 GT vert 5spd was a 67 Camaro with a 383 Lingenfelter, turbo 350, 3000 stall and 4:10s - a 12.31 NA and 11.13 car on a 150 shot with drag radials. See pic below - forgive me Ford diehards but I love ALL AMERICAN muscle.

Sicy Stang · 04-16-2003, 08:27 PM

Quote:

Originally posted by Ieatcamaros
Sig goes along with the username, obviously.

Thank you for pointing out your sig

Ieatcamaros · 04-16-2003, 09:41 PM

tmoss, at least you aren't a ricer who is convinced that the 4 banger under the hood will make more power than any american v8. I will give you that much credit. Chevy did have it going on in the late 60's and early 70's, though. But, I still hate em.

Barry Jackson · 04-17-2003, 12:40 PM

Ok, I am running the same thing. There is a wire to start and one for the run. I wll look tonite and try to find some answers

Ieatcamaros · 04-17-2003, 10:12 PM

Barry, I hope you got the right answers. I can't find **** on the net to actually pin point what I want to know. I got the module with the blue connectors at the module and it has the following wires on it. One plug has a white and a red wire coming out of it. This should be the two wires I need to hook up to the existing mustang harness for the start and run? The other has green, orange, purple, and black wires in that order. That should be the coil and the distributor right? Thanks.

04-13-2003, 08:17 PM	#1
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	wiring the duraspark II in a 89 GT I am fixin to swap the 302 to a 351 and swap to carb at the same time. I have read Fletch's carb'd mustang site a hundred times. http://www.jason.fletcher.net/tech/e...b/efi-carb.htm Does anyone here know exactly which wire is what on the black and grey connectors by the brake booster? I got the ignition module with the blue connectors where the wire meets the module. I am going to try to do this in a weekend (next weekend) and I was hoping that someone could just tell me which wire goes where to save me some time. __________________ The sig says it all.

04-14-2003, 03:53 PM	#2
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	no one? __________________ The sig says it all.

04-15-2003, 06:30 AM	#3
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	up __________________ The sig says it all.

04-15-2003, 04:06 PM	#5
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	I have some schematics on the duraspark II ignition system. But I am glad you posted that, cause I like it better than the ones I have. What I need to know is what wires are what on the mustang (the ones that lead into the plugs by the brake booster). If anyone on this forum knows, please post it. tmoss, I appreciate your help. __________________ The sig says it all.

04-15-2003, 09:50 PM	#7
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Well, I am glad somebody thought it was funny. I actually got that idea from an old four wheeler sticker my buddy had. It said "This bike eats hondas and shits suzukis". Sig goes along with the username, obviously. I thought it was pretty creative. And when I get my 351 put in, I will have that sticker made and put on. I hate chevys so damn much, especially the slomaro. Vettes used to piss me off until I realized that everyone driving them is 50 years old. I saw some dude on a ricer forum that probably had been here before. His username was ieatnissans. Must have been a honda man. Imagine that. Damn ricers. __________________ The sig says it all.

04-15-2003, 04:54 PM	#6
Sicy Stang Sizzlin' Sicilian Join Date: Mar 2003 Location: California Posts: 502	I just wanted to say that your username actually made me laugh out loud.

04-16-2003, 04:01 PM	#9
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Hey tmoss, you don't have a vette do you? Just kidding man. Most of the 50+ guys and gals in vettes aren't interested in racing. At least not around here. Hell, some of them don't even drive the ***damn speed limit. I have gotten some old guy in a powerstroke 3/4 ton to race me before. Fireturd is a good idea, I will remember that. Thanks for the suggestion. __________________ The sig says it all.

04-16-2003, 09:41 PM	#12
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	tmoss, at least you aren't a ricer who is convinced that the 4 banger under the hood will make more power than any american v8. I will give you that much credit. Chevy did have it going on in the late 60's and early 70's, though. But, I still hate em. __________________ The sig says it all.

04-17-2003, 12:40 PM	#13
Barry Jackson Registered Member Join Date: Oct 1998 Location: Pitts. Pa. USA Posts: 61	duraspark wiring Ok, I am running the same thing. There is a wire to start and one for the run. I wll look tonite and try to find some answers __________________ 87 LX, 74 351W, performer plus intake, holley 750, vac sec., 78 prim. 80 sec., 50 pump: Wolverine cam 292-512, windsor heads, ported 3 angle valve, 4:10 rear, AOD, Lentech valve body w/ 10'' converter. No time slips yet!

04-17-2003, 10:12 PM	#14
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Barry, I hope you got the right answers. I can't find **** on the net to actually pin point what I want to know. I got the module with the blue connectors at the module and it has the following wires on it. One plug has a white and a red wire coming out of it. This should be the two wires I need to hook up to the existing mustang harness for the start and run? The other has green, orange, purple, and black wires in that order. That should be the coil and the distributor right? Thanks. __________________ The sig says it all.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1996 Cobra vs 2000 Mustang GT	Milktasd	Stang Stories	2	04-05-2002 03:11 AM
RESULTS - Grand Prix GT vs. Celica GTS	302 LX Eric	Stang Stories	7	09-25-2001 06:46 PM
ran a '01 GT	EZRIDN	Stang Stories	3	08-29-2001 08:17 PM
Whooped an '85 GT with my Wife's Volvo	NO SLO PK	Stang Stories	8	07-20-2001 12:46 PM
Moroso results w/ stock 207K '87 GT	EZRIDN	Stang Stories	3	07-12-2001 03:58 PM